What Does Reese Quick-Install Custom Installation Kit # RP50087-58 Weigh

Question

Question:

Can you tell me the weight of the Reese Custom RP50087-58? This is the rail and mount kit? Are these same mounts available without the rails? If so, please tell me that part number. Thanks

asked by: CL

0

Expert Reply:

The weight of the Reese Quick-Install Custom Installation Kit # RP50087-58 is 67 lbs. This comes with the rails, the frame brackets, and all of the hardware needed to install the kit.

For just the brackets you'd want the part # RP50087 instead.

expert reply by: Jameson C

0

Answer 1

I reached out to Cequent, the maker of Pro Series, and they have discontinued the 4 bolt rails you mentioned, but still have mounts for some vehicles. Unfortunately your 2016 Ford F-150 with 6-1/2 foot bed isn't one of the models that has those…

view full answer...

Answer 2

The correct custom bracket set and hardware kit for your 2018 Ford F-150 will depend on if you have 43" long or 48" long base rails. If you have 43" long base rails these are what is referred to as inboard rails and you will need to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hey Don, thanks for the information! That's a significant amount of sag and a pretty heavy trailer, I recommend the Hellwig Pro Series Helper Springs item #HE79FR for the higher 2,500 lbs capacity. I doubt you're driving around with your bed…

view full answer...

Answer 10

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 11

Hey Mike, I double checked with Curt just now and their front hitch part #C31083 does fit your 2018 Ford F-150 with the 2.7 liter ecoboost! What are you planning on using the hitch for?

view full answer...

Answer 12

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

What Does Reese Quick-Install Custom Installation Kit # RP50087-58 Weigh

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching