Recommended Tire and Wheel Combo to Replace a 20.5-8 x 10 Tire


I have a 20 ft pontoon with 40hp 4 stroke on a Shorlandr trailer. The hub is 5 x 4.5inch. The tire is 20.5-8 x 10. Another label says 95M and E11. Another label says X2BU. I want to replace the tire/wheel combo on each side. What should I ordr?


Expert Reply:

I recommend going with the Kenda 205/65-10 Bias Trailer Tire with the 10" Galvanized Wheel found as part # AM3H490 on our site.

The tire is similarly sized with an 8.4" section width and a 20.4" outer diameter. It also has a load range of E (1,650 lbs at 90 psi) and a max speed rating of 65 mph.

The wheel has the same 5 on 4-1/2" bolt pattern which is the same as your current wheel so it will fit perfectly on your trailer. This wheel has a galvanized finish on it which provides superior protection from rust and corrosion and it meets DOT specifications.

I have attached a review video for you to check out as well.

Click to Enlarge
expert reply by:
Jon G

Product Page this Question was Asked From

Follow up Questions

Similar Expert Q&A Pages

See More Q&A Expert Answers >>