Is Curt Venturer Trailer Brake Controller a Plug-and-Play Option on 2014 GMC Sierra?

Question

Question:

Does the Curt Venturer Trailer Brake Controller - 1 to 3 Axles - Time Delayed Item # C74VV plug and play directly into a 2014 GMC Sierra? If not, is there one that first plug and play. I have the spot in my truck where to plug in the harness.

asked by: Addison S

0

Expert Reply:

If you have the factory tow package on your 2014 GMC Sierra 1500, which from your description it sounds like you do, then the Curt Venturer Trailer Brake Controller # C74VV is plug-and-play. All you need is the Curt Custom Wiring Adapter # C51451; one end plugs into the brake controller and the other end plugs into the port beneath your dash.

expert reply by: Kyle S

0

Bill C.

5/15/2020

With this very same plug and play package on my 2017 Silverado, the tail lights stay on when the engine is turned off. What is going on?

Chris R.

5/18/2020

Is it the tail lights on the truck or the tail lights on the trailer that are staying illuminated? The tail light circuits really aren't related at all to the brake controller connection, so something has to be shorting out to the trailer wiring for this to occur. Have you made sure that the controller is what's causing the issue (unplug the unit to see if the light issue persists)?

Willard J.

5/18/2020

@ChrisR I am sorry that I didn't relay that info. It is the truck brake lights that go on when the doors are all closed. I have never plugged in the harness to the trailer yet. I haven't picked it up yet from the dealership. I did talk to a Chevrolet parts department person today and we found out the plug and play harness is OK. That leaves the controller at fault. I have ordered another one from Amazon and will try that as soon as it arrives. I will let you know what happens with the new controller. Thanks for the reply. This controller did not get the greatest reviews, but I thought it would get me buy until I get back to Michigan to my other truck that has a good controller and I turn in this leased 2017 Silverado. I didn't want to invest to much in something that was only going to be used on a one way trip. Again, thank you.

Chris R.

5/21/2020

@Willard No need to be sorry! Thanks for letting me know. Please keep me updated if issues persist with the new controller and we can try to figure out what's going on.

Answer 1

For your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3…

view full answer...

Answer 2

Hey Dennis, If you aren't looking to use your camper's electric brakes and just want the standard lighting functions from the 4-way, all you'll need is an adapter: - Adapter 4 Way to 7-Blade RV Connector #C96KR You'll just plug your…

view full answer...

Answer 3

For your 2020 Ram 1500 Classic and Curt Venturer Brake Controller #C74VV you can simply use the wiring harness #C51458 to connect it. It will be a simple plug and play with your factory wiring connectors.

view full answer...

Answer 4

The brake controller jumper wire you found in the glove box can be used to wire in the brake controller you have. I am not sure which controller you have but basically you'll plug the harness into the port under your dash for the brake controller…

view full answer...

Answer 5

On your 2014 GMC Sierra 1500 there is a junction box with a black cover on it located on the driver's side floorboard, way in the back, to the left of the brake pedal. There should be an empty spot to plug in the wiring harness located in the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Is Curt Venturer Trailer Brake Controller a Plug-and-Play Option on 2014 GMC Sierra?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching