Is the Bearing Kit # BK1-100 Correct for my Trailer
Updated 02/28/2018 | Published 02/27/2018
Products Featured in This Question
Question:
Can you recommend wheel bearing kit for a small one axil trailer? It has 4 lugs on each wheel. It is not marked for who manufactured it. Here are spindle and hub measurements. Spindle B measure seal: I/S 1.30 in, O/S 1.21 in C measure spindle I/S bearing 0.98 in D measure spindle O/S bearing 0.98 in Hub Outer race diameter 2.04in Inner race diameter. Inner race diameter is not known specifically but must be about 1.0 in. Inner seal diameter 2.02 in Outer hub grease cap diameter 2.02 in Outer race marked China 30205
asked by: Kurt
Expert Reply:
The closest bearing and seal that we have to what you measured is found in the bearing kit # BK1-100 which is for a BT8 spindle. It comes with 2 bearings, 2 races, 1 grease seal, and a cotter pin.
The bearing part # L44643 is for both the inner and outer bearing. It has an inner diameter of 1.000" while the included race, part # L44610, has an outer diameter of 1.98" which sounds like what you have.
For the seal in the kit we have part # 34823 which has an inner diameter of 1.249" and an outer diameter of 1.983".
Some of the dimensions that you gave look like they may not match up correctly. If you could take your measurements again with a digital caliper and note them to the 3rd decimal place I can help you verify if this is the correct fit or not.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing Kit - BT8 Spindle, Bearings L44643, Races L44610, Seal 34823
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: bearing buddies
- Search Results: marine wheel bearing grease
- Search Results: l44649 bearings
- Search Results: bearing buddy
- Search Results: l44649 bearing kit
- Search Results: marine grease
- Search Results: trailer bearings races seals caps
- Shop: Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Q&A: Replacement Bearings and Bearing Buddy Protectors for 2008 Yacht Club Trailer
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel - Qty 2
- Q&A: What Grease Seal Comes with the BK1-150 Bearing Kit
- Shop: Replacement Trailer Wheel Bearing Kit - BT8 Spindle, Bearings L44643, Races L44610, Seal 34823
- Shop: Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated - Qty 2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Q&A: How to Pick Out Replacement Hubs for Yacht Club Trailer WC112
- Q&A: Replacement Bearing/Seals for Hubs With 1 Inch Spindle
- Q&A: What Would Cause Grease to Appear All Over Trailer Wheels on 3 Trailers
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Bearings Races Seals Caps
