Recommended Adjustable Ball Mount for a 2014 Ram ProMaster 1500 with a 2 Hitch Receiver

Question

Question:

I have a 2014 Ram Promaster and am looking at getting the Draw-Title Max-Frame Trailer Hitch. What adjustable ball mount would you recommend? I will be towing a car sometimes and a trailer other times.

asked by: Ivy F

0

Expert Reply:

Choosing an adjustable ball mount is a great idea for when you have multiple towing applications. Since the Draw-Tite Max-Frame Trailer Hitch Receiver # 75882 for your 2014 Ram ProMaster 1500 (non-EXT model) has a 2" hitch receiver I recommend picking up the etrailer Adjustable 2-Ball Mount # e66PR which offers a 6" rise/drop.

I'm attaching a photo showing how to measure your current trailer to make sure this will work for your application.

expert reply by: Jon G

0

click to enlarge

Answer 1

Hey David. I would go with a different ball mount if you're concerned about being able to adjust in 1-1/2" increments. I recommend the etrailer Adjustable 2-Ball Mount item #e66PR. Comparably it's pretty similar to the Bulletproof item…

view full answer...

Answer 2

Hey Derek. Yes - as long as your ball mount has a 2 inch shank, it’ll slide right into the etrailer clamp-on bucket hitch receiver #e75ZV. That’s one of the nice things about it using a standard receiver size instead of proprietary hardware. You…

view full answer...

Answer 3

Hello Dorsey, thanks for reaching out. I am sorry to say that we do not offer the ball portion of the etrailer Adjustable 2-Ball Mount #e66PR by itself. This is a newer part, and we have seen a few requests for this specific part in the past. So…

view full answer...

Answer 4

Hey Lynn, on the TowSmart X-Mount Adjustable 2-Ball Mount #TS88FR the distance from the furthest hitch pin hole to the ball mount center is 11-1/2 inches. The closer hitch pin hole is 2 inches closer so it's 9-1/2 inches.

view full answer...

Answer 5

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 6

This could be a magnet wiring problem. It is unlikely that the magnets are bad on newer assemblies, but if the wiring is not properly connected, it could cause problems. Check to see that the magnets are properly grounded to a clean, bare metal…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Recommended Adjustable Ball Mount for a 2014 Ram ProMaster 1500 with a 2 Hitch Receiver

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching