Mounting Hole Locations On Brackets of Universal 5th Wheel Rail Installation Kit
Published 12/19/2017
Question:
I have seen on one of the QuestionandAnswers when you have measurements of the Lbrackets length and width, what I need are the mounting hole specs? From the center too center, and the length from the each end?
asked by: Myles
Expert Reply:
There are 2 different L brackets in the Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish # C16200. One has 3 holes and the other has 4 holes. The mounting holes are consistent in location on both. They are 3/4 inches on center from the bottom and then 1-1/2 inches on center from each other. The attached photo will show this. The length from the inside of the L curve to the center of the last hole is 1.75 inches on the shorter one and 1.5 inches on the taller one. That gives you 2 inches to center on the short one and 1.75 inches to center on the long one when measuring to the top of the bracket.
Product Page this Question was Asked From
Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish
- 5th Wheel Hitch Rails
- Custom
- Above the Bed
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Semi-Custom Fifth Wheel Installation Kit for Dodge Ram 1500 - Gloss Finish
- Shop: Curt Universal Fifth Wheel Base Rails with Installation Kit - Carbide Black Finish
- Q&A: Installation of Curt Universal Fifth Wheel Base Rails on 2007 Dodge Ram Pickup
- Q&A: What Is The Spacing Required Between Two Base Rails
- Q&A: Do Curt Fifth Wheel Rail Kits Have Weight Capacities
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Shop: Brake Controller
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Shop: Fifth Wheel Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: 2-1/2 inch Trailer Hitch Recommendation for 2008 Dodge Ram 3500 for Use with Hitch Extender
- Search Results: trailer hitch ball mount
on 5th Wheel Hitch Rails
