Front Hitch for 2017 Winnebago Built on Ford E-450 Chassis

Question

Question:

I have a 2017 Winnebago Minnie, Ford chassis E450. Can you help me with a front bumper hitch set up?

asked by: Sorn C

1

Helpful Expert Reply:

There is a front-mounted hitch that is a fit for your 2017 Winnebago built on a Ford E-450 chassis, the Draw-Tite # 65053. It is a bolt-on installation that comes with the necessary hardware for install.

expert reply by: Kyle S

1

click to enlarge

Answer 1

The Draw-Tite #65053 is a fit for the 2016 E450. I've confirmed this with Draw-Tite. I attached an install picture of this hitch installed on a similar E-450 as yours for you to check out as well.

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #65053 is confirmed to fit your Sunseeker RV built on the 2014 E-450 but whether or not it will interfere with factory installed stabilizer jacks will really just depend on exactly where they're…

view full answer...

Answer 3

For your 2018 Coachmen Leprechaun on a 2017 E 450 Ford cutaway chassis we have the Draw Tite front hitch part #65053 as a confirmed fit that would work well. We confirmed this fit with Draw Tite so we know it will work well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Robert! The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR will indeed fit your 2026 Ram 3500 diesel Mega Cab Laramie edition. I confirmed this with EcoHitch and we actually have a review from another person that…

view full answer...

Answer 11

Thanks for the information Brian! To add a front hitch to your 2026 Ram 2500 with a diesel engine, you'll need the EcoHitch Hidden Front Hitch item #EH37FR. For camper tie downs front and rear, I recommend the TorkLift Tie Downs item #TL73NR. The…

view full answer...

Answer 12

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Front Hitch for 2017 Winnebago Built on Ford E-450 Chassis

Continue Researching