Replacing the Lock and Lock Housing on a Sears X-Cargo Sport 15 CAV

Question

Question:

I have a x cargo sport 15 cav that i got off a friend the lock was damaged i drilled out the cylinder and now need a new one but not sure which one would fit it is the cargo carrier that has the lock riveted onto it any help would be appreciated

asked by: Kenneth A

0

Expert Reply:

Because of the drilling, you'll likely want to replace the full housing with part # SR03807, which will provide you with two locks, lock assemblies, and keys to replace the existing locks and keys.

expert reply by: Jacob W

0

Answer 1

We have had this question come up before. To replace the lock on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Lock Core and Key #SR03807. This will work if the locks look the same. There is a lock nut on the back of the lock…

view full answer...

Answer 2

Since you are needing a replacement lock as well as the key, you can use the Replacement Lock Core and Key #SR03807 for your Sears X-Cargo Sport 20 cargo box.

view full answer...

Answer 3

In order to retrofit the Replacement Lock Core and Key part #SR03807 and Replacement Lock Locator part #TH03808 to the top lid on your cargo box you would need to drill out the two rivets for the old lock and then drill a new 5/8" hole for the…

view full answer...

Answer 4

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 5

I spoke to my contact at Thule and she told me that there were a couple different generations of the Sears Sport 15-CAV and they have replacement lock hardware that would work for one of the generations, but without knowing what generation you have…

view full answer...

Answer 6

The correct replacement key for the 2802 lock on your Sears X-Cargo Sport 20 roof box is part #THKEYN2802 on our site. Thule helped make the Sears boxes so the N series keys from Thule are compatible. Attached is a photo a customer sent in of this…

view full answer...

Answer 7

Actually, after looking at the picture you submitted the number stamped on your lock core is 2826 and you would need the replacement key part #THKEYN2826. There isn't a replacement key for the lock core number 2828. I am glad you submitted that…

view full answer...

Answer 8

We do offer replacement parts for your Sears X-Cargo 20-SV rooftop cargo box. For a set of 2 locks and 2 keys you can use part #SR03807. This will work if the locks look the same. There is a lock nut on the back of the lock assembly that will need to…

view full answer...

Answer 9

If you've already tried using the silicon spray and there is still no luck, then your best bet is to have the lock cores replaced, unfortunately. What you're going to need to is either call a locksmith and have them remove the key or you can…

view full answer...

Answer 10

In order to get the correct replacement key for your Sears Sport 20-SV Cargo Box you will need to look on the lock core for a three digit number. Once you have this number you can then search on our site for part THKEYN###with the ###being the number…

view full answer...

Answer 11

The key for a Sears X-Cargo Sport 20 cargo carrier with a 2856 lock core is the #THKEYN2856. If you've already ordered the correct key and lubed the lock and still can't get it to open it may just be rusted out internally and need to be…

view full answer...

Answer 12

The Replacement Mounting Hardware #TH05603 is 4 inches on center. If this is what your X-cargo XL 90040 roof box has, then it will be a fit without modification. Another option is the hardware kit #TH04997 that is also 4 inches on center. If your…

view full answer...

Replacing the Lock and Lock Housing on a Sears X-Cargo Sport 15 CAV

Product Page this Question was Asked From

Continue Researching