Replacement Hitch Pin for Yakima HoldUp 2 Bike Rack Y02445

Question

Question:

Will this hitch bolt fit my Yakima Hold Up 2, model number Y02445. My vehicle has a 1.25 inch OEM hitch. It is a 2014 Subaru Outback. Thank you.

asked by: James B

0

Expert Reply:

Yes, Yakima Replacement Hitch Bolt # Y8880129 is the correct item to secure the HoldUp Hitch Bike Rack # Y02445 in your 1-1/4-inch Class II hitch.

expert reply by: Adam R

0

Answer 1

The Yakima Threaded Hitch Bolts #Y8880131 have a 1/2" -13 thread pitch. I do not see we have any M20 threaded hitch pins or bolts as this is larger than a 3/4" bolt. Most hitch pins are 1/2" or 5/8" in diameter.

view full answer...

Answer 2

Easiest way will be based on what bike rack you have. Could you get me that info and I can check to see which pin you'd need for a replacement.

view full answer...

Answer 3

I have a solution for you but the Replacement Hitch Adapter #Y8890174 will not work for your Yakima Holdup #Y02445. We have the 2-inch replacement tongue you can install on your bike carrier. It is part #8880580. Or, if you prefer to replace the…

view full answer...

Answer 4

Hey Ernie! There isn't a 2" adapter that will work with the 1-1/4" Yakima StageTwo Bike Rack item #Y67VR, on a trailer, but I have a solution for you. You'll want to use a Hitch Reducer like item #HT02. The 2" to 1-1/4"…

view full answer...

Answer 5

To replace the threaded hitch pin and lock for your Yakima HoldUp, it will depend on if you have the 2" shank or if you have the 1-1/4" shank with a 2" adapter. For the 2" shank, you will need the Replacement Hitch Bolt and Clip…

view full answer...

Answer 6

I believe you are referring to the Yakima HoldUp #Y02443. If you need just the HitchLock alone, that is the #Y07235. However, if you need the hitch pin that is compatible with both the HitchLock and the HoldUp itself, that is the #Y8890200.

view full answer...

Answer 7

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

view full answer...

Answer 8

Both of the bolts that come with the Yakima Hitch Pin Set #Y8880131 are 1/2 inch diameter with 13 threads per inch. One is 4.279” long and the other is 2.598” long.

view full answer...

Answer 9

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be reused.

view full answer...

Answer 10

You will need Replacement Mounting Hardware #Y8890176 to go with Replacement 1-1/4" Tongue for Yakima HoldUp Bike Racks #8880581.

view full answer...

Answer 11

Yes! For a great option to increase the snugness of your bike rack with the hitch reducer, I recommend the Roadmaster Quiet Hitch for 2-1/2" Trailer Hitches #RM-062. This accessory will be able to tighten to provide you with the extra tightness…

view full answer...

Answer 12

Replacement Threaded hitch pin #Y8880129 is indeed longer than the original bolt. It is 4.28 inches long overall. Something that you should know though is that when using a hitch adapter like you mentioned it reduces the tongue weight capacity of the…

view full answer...

Replacement Hitch Pin for Yakima HoldUp 2 Bike Rack Y02445

Continue Researching