Recommended Trailer Hitch and Wiring for 2017 Ford Edge Titanium  

Question:

Expert Reply:

The various components of a factory towing package can vary greatly between vehicle manufacturers and models. I was not able to confirm what the towing package for your 2017 Ford Edge consists of, but adding aftermarket products to a vehicle will not increase its base towing capacity. This is simply because a vehicle is always going to be limited by its weakest component.

If the owner's manual states a towing capacity of 2,000 pounds for your vehicle (which I was able to verify), then you will always be limited by this number, even if you were to add a hitch with a greater capacity or an aftermarket transmission cooler. I do not recommend exceeding the capacity of the vehicle itself.

For a Class III trailer hitch that is confirmed to fit your 2017 Ford Edge Titanium, I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75214. This custom-fit hitch will use existing holes in the vehicle's frame for a no-drill installation. I have attached an installation video on your Ford Edge that you can use for reference.

Since it sounds like you will be doing some towing, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118677 to add a 4-Way connector to the vehicle. This harness is also custom-fit for your Edge and will install by connecting directly to the built-in ports located behind the driver and passenger side tail lights.

You will also need a ball mount to tow a trailer. I have attached a great article that explains how to choose the best one for your setup, along with a link that will take you to our available selection.

Lastly, if you would like to add a transmission cooler, I highly recommend the Derale Transmission Cooler # D13503. This is a great, plate-fin cooler that will help to prolong the life of your transmission and also improve its overall performance. The unit measures 11 inches wide, 8-3/4 inches tall, and 7/8 inches deep. You will just want to make sure you have this space availabel between your grille and AC condenser core.

expert reply by: Chris R

0

Kim T.

2/1/2020

Is there a after market trailer hitch 1.25 for bicycle rack that doesnt interfere with the under bumper sensor?

Jason S.

2/3/2020

For your 2017 Ford Edge Titanium, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12140 is a fit. It will allow you to use your hands free lift gate sensors, but the center where the receiver tube is located will slightly limit the sensors. Putting your foot to either side of center will still allow that feature to function well.

Helpful Links

tv-install-trailer-hitch-2017-ford-edge-c12140.aspx