Do the Detail K2 Snowplows Come with a Mounting Kit

Question

Question:

Does the mounting kit included with the plow I have a Dodge Ram 1500

asked by: Tony

0

Expert Reply:

I do have the mounting kit you would need to install a snowplow such as the Detail K2 Storm II Snowplow part # K2STOR8422 on your 2000 Dodge Ram Pickup but the mounting kit is not included with the snowplow. For a mounting kit that will allow you to attach the above snowplow to your Ram, you would need the Custom Mounting Brackets for Detail K2 Snowplows part # K284309. As long as your Ram is not a sport model then the above mounting kit will work well for you.

expert reply by: Conner L

0

Answer 1

This snowplow will work with your 2019 GMC Yukon if it has the custom mounting brackets for your vehicle. Your setup will inlcude the following items: Detail K2 Storm II Elite Snowplow - Custom Mount - Electric Actuator - 84" x 22", part…

view full answer...

Answer 2

Apart from the size of the plows, another economic factor is whether the plow is electric actuator driven like the Detail K2 Rampage II Elite Snowplow - Custom Mount #K2RAMP8219ELT or electric winch driven like the Detail K2 Rampage II Snowplow…

view full answer...

Answer 3

Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the SnowBear Snowplow #K2AVAL8826 requires a hitch…

view full answer...

Answer 4

For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part #K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part #C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82"…

view full answer...

Answer 5

When in the through bumper position, from the bottom of the frame to the bottom of the cross tube it looks to be approximately 8-1/2 inches. I have included a link to the installation instructions for you to view. Through bumper configuration…

view full answer...

Answer 6

Yes, you can use the Detail K2 Rampage II Snow Plow part #K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part #K281100.

view full answer...

Answer 7

Yes, the Detail K2 Rampage II Snowplow part #K2RAMP8219 can be used on gravel. I spoke to my contact at Detail K2 and they informed me that the 2-3" lift on your 1989 Toyota Pickup will not be a problem while using this snow plow. The plow has…

view full answer...

Answer 8

Choosing a snow plow can be a bit intimidating because of all the choices available on the market. The snow plow I recommend for your 1997 Nissan Pathfinder is the Detail K2 with a custom mount: Detail K2 Rampage II Elite Snowplow - #K2RAMP8219ELT…

view full answer...

Answer 9

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

view full answer...

Answer 10

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Do the Detail K2 Snowplows Come with a Mounting Kit

Product Page this Question was Asked From

Continue Researching