Can Detail K2 Rampage II Plow be Used with 1988 Ford Bronco II

Question

Question:

Will this fit a 1988 bronco2 4x4 and what mounting bracket would be needed. Thanks

asked by: Shawn S

0

Expert Reply:

Yes, you can use the Detail K2 Rampage II Snow Plow part # K2RAMP8219 on your 1988 Ford Bronco II with the correct custom install bracket kit part # K281100.

expert reply by: Jameson C

0

Answer 1

I do have the mounting kit you would need to install a snowplow such as the Detail K2 Storm II Snowplow part #K2STOR8422 on your 2000 Dodge Ram Pickup but the mounting kit is not included with the snowplow. For a mounting kit that will allow you to…

view full answer...

Answer 2

For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part #K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part #C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82"…

view full answer...

Answer 3

When in the through bumper position, from the bottom of the frame to the bottom of the cross tube it looks to be approximately 8-1/2 inches. I have included a link to the installation instructions for you to view. Through bumper configuration…

view full answer...

Answer 4

Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the SnowBear Snowplow #K2AVAL8826 requires a hitch…

view full answer...

Answer 5

Apart from the size of the plows, another economic factor is whether the plow is electric actuator driven like the Detail K2 Rampage II Elite Snowplow - Custom Mount #K2RAMP8219ELT or electric winch driven like the Detail K2 Rampage II Snowplow…

view full answer...

Answer 6

This snowplow will work with your 2019 GMC Yukon if it has the custom mounting brackets for your vehicle. Your setup will inlcude the following items: Detail K2 Storm II Elite Snowplow - Custom Mount - Electric Actuator - 84" x 22", part…

view full answer...

Answer 7

Yes, the Detail K2 Rampage II Snowplow part #K2RAMP8219 can be used on gravel. I spoke to my contact at Detail K2 and they informed me that the 2-3" lift on your 1989 Toyota Pickup will not be a problem while using this snow plow. The plow has…

view full answer...

Answer 8

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

view full answer...

Answer 9

Choosing a snow plow can be a bit intimidating because of all the choices available on the market. The snow plow I recommend for your 1997 Nissan Pathfinder is the Detail K2 with a custom mount: Detail K2 Rampage II Elite Snowplow - #K2RAMP8219ELT…

view full answer...

Answer 10

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Can Detail K2 Rampage II Plow be Used with 1988 Ford Bronco II

Product Page this Question was Asked From

Continue Researching