Could B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches Tow 5th Wheel Trailer

Question

Question:

can i haul fifth wheel with it?

asked by: Daniel

0

Expert Reply:

If your fifth wheel trailer had an inverted gooseneck hitch ball installed on the pin box yes, the part # BWGNXA4025 would work well but that's a pretty rare setup so this may not be what you are looking for.

expert reply by: Jameson C

0

Answer 1

I am sorry but we do not have a round shank gooseneck adapter to allow you to tow an inverted hitch 5th wheel trailer. We offer only the B&W Turnoverball King Pin Adapter #BWGNXA4000 that you mentioned and the #BWGNXA4025 which allows use of an…

view full answer...

Answer 2

B&W Turnoverball Adapter #BWGNXA4025 is designed to fit in the B&W gooseneck trailer hitch in the truck bed and couple to a trailer that has the ball welded on instead of a coupler. It would not work to tow a 5th wheel trailer but you can use…

view full answer...

Answer 3

The shaft of the B&W Turnoverball Adapter, #BWGNXA4025, measures 4-1/4 inches long from the base and it is 2-1/2 inches by 2-1/2 inches square. This adapter was specifically designed to fit in a B&W Turnoverball gooseneck trailer hitch.

view full answer...

Answer 4

Hey Kevin, are you wanting to use the upper ball section of the Pullrite ISR part #PUL53RR with the B&W Turnoverball Adapter #BWGNXA4025 since you don't have much clearance between the ball and your king pin? That would be an interesting…

view full answer...

Answer 5

Hey Rick. We have the upgraded model with the air bag that fits a Lippert 1621HD bolt pattern. It's the Shocker Hitch 5th Wheel to Gooseneck Coupler Kit w/ Demco eZ-Latch for Lippert and Rhino Box - 24K item #SHK99YR. Almost an identical setup to…

view full answer...

Answer 6

Hello Greg. I do have a potential solution for you, but the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G that you were looking at will not work for this purpose. Reason being that this kind of adapter is not compatible with a…

view full answer...

Answer 7

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 11

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 12

On the 2006 Dodge Ram 1500 that came with either a factory 4-Way or 7-Way trailer connector the receptacle to plug in a brake controller with a harness such as #3020-P will either be on top of or along the side of a white rectangular box back along…

view full answer...

Could B&W Turnoverball Adapter for Trailers with Inverted Gooseneck Hitches Tow 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching