Recommended Installation Screws for 1/2 Inch Metal Loom Clamp # A0500
Published 07/05/2016
Products Featured in This Question
Question:
I want to installing a 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30inch Ground Wire, Code: A20WB on an open trailer. What type and size self tapping screw do you recommend for attaching the Metal Loom Clamp - 1/2inch , Code: A0500? Thanks,
asked by: Calvin H
Helpful Expert Reply:
For the Metal Loom # A0500 you will want to use the self-tapping screws like the part # FA1131822. The nice thing about this screw is that it doesn't require a pilot hole, just line it up and let the drill bit end of the screw do the work for you. This threaded screw will secure your loom clamp securely on your trailer.
I have linked the above mentioned products to this page for your purchasing convenience.
Product Page this Question was Asked From
- Electrical Tools
- Cable Management
- Wire Clips and Clamps
- 1/2 Inch Diameter
- Black
- Redline
more information >
Continue Researching
- Search Results: tekonsha p3
- Q&A: Is a Parking Brake Required for an Electric Over Hydraulic Trailer Braking Setup
- Q&A: Difference Between Demco and Dexter Replacement Hydraulic Actuator Shocks
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Q&A: Disc Brake Kit With 10 Inch Rotors For Salt Water Use
- Q&A: How to Pick Out Brakes for 3,500 lb Boat Trailer with Tandem Axles
- Q&A: Parts Needed To Replace Disc Brake Assemblies On Yamaha Boat Trailer By MFI With 3,700LB Marine Axle
- Q&A: Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
- Shop: Brake Controller
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-9067 Review
- Video: Checking Out the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Electric Lockout
- Video: Detailed Breakdown of the Metal Loom Clamp
- Video: Complete Breakdown of the Kodiak Disc Brake Kit-K2R35S
- Article: Which Hitches are Made in the USA
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc
- Shop: DeeMaxx Stainless Steel Hex Scew w/ Indented Washer - Self-Drilling - 3/8"
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - OEM - 1,600 psi
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Trailer Hitch
- Shop: Nerf Bars - Running Boards
- Video: Remove and Reinstall a Trailer Hub Review
- Search Results: tandem fender
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Search Results: brake lines