Replacement Wesbar Trailer Taillight Lens 102641 Recommendation for Trailer Lights

Question

Question:

Hi, I have a trailer that has both rear tail lights wesbar lights. I have broken both #102641. Both are the same, and have ends on them #102639.I need both sets= 4 pieces. Do you have them? Thanks.

asked by: Clifford F

0

Expert Reply:

We have just the part # 102641 which is a red lens for a Wesbar taillight, or for the full lens kit you'd want the part # 053522033360.

expert reply by: Jameson C

0

Answer 1

Hey Keb! We do have replacement lenses for your Wesbar lenses, but not in a kit to replace both taillights. Replacement Tail Light and Side Marker Lens for Optronics Combination Tail Light - Rectangle - Red #A16RB is a direct replacement for both the…

view full answer...

Answer 2

Thanks for the picture of your trailer taillight. Based on that the ONE LED Trailer Tail Light part #STL0066RBG that you listed is an exact replacement for it.

view full answer...

Answer 3

Thanks for reaching out! You are correct that the SAE number isn't the part number for the trailer light. It stands for Society of Automotive Engineers and is just a way of showing that the light manufacturer completed the required testing for…

view full answer...

Answer 4

I went out into our warehouse and pulled an Optronics Replacement Tail Light Lens #A16RB and a Wesbar Replacement Lens #053522033360 and compared the two and found they are virtually identical. Check out the video I attached that shows both of these…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Wesbar Trailer Taillight Lens 102641 Recommendation for Trailer Lights

Featured Help Information

Miscellaneous Media

Continue Researching