Backspacing and Offset of the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22627

Question

Question:

Can you ket me know the offset and back spacing for this wheel.

asked by: Jim

1

Helpful Expert Reply:

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22627 that you referenced has a zero offset and a backspacing of 3-1/2 inches.

expert reply by: Jameson C

1

Answer 1

Hi Daniel, So I checked and Lionshead has discontinued the Jaguar 15x6 wheel so it's not something you'll be able to get. I hope you're not mad at me but the only option I can give you is to replace it with another wheel. For the same…

view full answer...

Answer 2

Going from the tire size of 205/75-15 to 225/75-15 is a pretty common change for trailer wheels. There are two things you'll want to verify though. First is that your wheel is either 6 inches wide or 6-1/2 inches wide. Those two widths are the…

view full answer...

Answer 3

In order to determine if you can go to a larger tire size you have to look at the available space all around the existing tires. The tire size you have now, 205/75-15, has a diameter of 27.1 inches and a width of 8 inches. The 225/75-15 trailer tire…

view full answer...

Answer 4

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 5

Yes, radial trailer tires can spin in either direction. They are not directional. I attached an FAQ article on trailer tires for you to check out as well.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Backspacing and Offset of the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22627

Continue Researching