Replacement Drum for 2013 Keystone Sprinter 311BHS Travel Trailer
Published 09/27/2017
Products Featured in This Question
Question:
Looking for a replacement drum for dexter AL-KO 8469 12 inch 6 stud drum. Will 8-201-5UC3 work? This is on a 2013 keystone sprinter 311bhs travel trailer.
asked by: Neil M
Expert Reply:
I was able to confirm that your Sprinter has a bolt pattern of 6 on 5 1/2". The drums you mentioned, # 8-201-5UC3, have the correct bolt pattern, but are only rated to work with 5200 lb axles. Based on the specs of your 2013 Keystone Sprinter, your GVWR is 10,995 lbs. So, I would guess that your axles are rated at 6000 lb. each, not 5200 lb. each.
To be safe, I would recommend # AKHD-655-6-K, which uses the same bearings and has the same bolt pattern, but is rated for 5200 lb and 6000 lb axles. You will want to check the bearing numbers of your current drums. The inner bearing of this drum is # 25580 (1.75" inner diameter) and the outer bearing is # 15123 (1.25" inner diameter). Use a digital caliper like # PTW80157 to ensure accurate measurements.
If the bearing numbers and/or measurements match, then # AKHD-655-6-K will work for you. this is a complete kit which includes the bearings, races, seal, grease cap and lug nuts. You will also need some Lithium Bearing grease like # L11316. A bearing packer like # L70025 will also come in handy.
I've provided a link to our article on Replacing Bearings, Races & Seals which has a section describing how to disassemble the hub to get to the bearings. I've also provided a link to an article with details on how to measure your bolt pattern. Finally, I've attached a video of hub and drum installation which you may find helpful.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: leaf spring
- Search Results: slipper spring
- Search Results: trailer hubs and drums
- Search Results: dexter drum
- Shop: Dexter Trailer Hub-and-Drum Assembly - 4.4K Axles - 6 on 5-1/2 - 10" Drum
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
- Q&A: Replacement Hub and Drum Kit with Bearings for Lippert 4400 Pound Trailer Axle
- Q&A: Does Trailer Hub # 8-407-5UC3-EZ Fit Dexter 4,400 lb Axle
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Q&A: How Much Travel Does The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2580 Offer?
- Shop: Replacement Slipper Spring for Roadmaster Comfort Ride Leaf Spring Suspension Kit - Qty 1
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Replacement O-Ring for 9,000-lb to 10,000-lb Dexter Oil Bath Hub and Drum Assemblies
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: How Far in a Trailer Hub Should the Grease Seal Go
- Q&A: Grease Seal Needed for a Dexter 4,400 lb Axle