What Type of Rollers Can be Used with the Thule Goalpost TH997

Question

Question:

I noticed in the pics on brads comments post he has roller carriers on his t-post. Is there any way of finding out what these carriers are and what hes using on the crossbars.

asked by: Jim

1

Helpful Expert Reply:

Customer Brad is using kayak rollers on his Thule Goalpost TH997. There are several options for these. You can get a set of 4 from Yakima using # Y04082-2 or a pair using # Y04082. I have linked a video of these rollers for you.

expert reply by: Michael H

1

click to enlarge

Answer 1

The difference between Landing Pad 1 #Y00221 and Landing Pad 4 #Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different…

view full answer...

Answer 2

The landing pad you have is either going to be in the kit Landing Pad 1 #Y00221 or Landing Pad 4 #Y00224. The landing pad 1 has a more square shaped channel nut while the landing pad 4 has a more rectangular channel nut.

view full answer...

Answer 3

The TruXedo Elevate ladder racks like the #TX46NV use crossbars that are larger than standard Aero bars, so you won't be able to use the Yakima HandRoll #Y04082. Instead I recommend the Rhino-Rack #RR581 instead as they'll install into the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 7

I have a solution for you, but your now discontinued Thule AeroBlade Edge TH7603B-TH7603B bars cannot be removed from the towers and mounted on different towers for a new vehicle. For that reason you will need a complete new roof rack for your 2021…

view full answer...

Answer 8

As long as the crossbars you use aren't wider than the widest part of the vehicle (usually the mirrors), which could be a safety problem or even illegal in some areas, you could certainly use longer crossbars than the 58 inch crossbars. Since…

view full answer...

Answer 9

For the 2017 Subaru Outback Wagon, I recommend the Malone DownLoader, part #MPG114MD. This is a flexible, J-Style rack that installs quickly onto your crossbars, and folds flat for when you don't have time to pull it off immediately. The carrier…

view full answer...

Answer 10

You will likely need to get a new rack like the Thule Hull-A-Port Kayak Roof Rack #TH834. The only parts available for the Thule 835 which was discontinued in 2003 are listed below. Replacement Base Pad #TH96JV Replacement Bottom Mounting Clamp…

view full answer...

Answer 11

I reached out to Yakima who said you can use the HandRoll Kayak Roof Rack #Y04082-2 with their LongArm Truck Bed Load Extender #Y01149. This will make loading your kayak much easier as it will roll on the extender.

view full answer...

Answer 12

Actually, the Malone #MPG107MD SeaWing would work pretty well if your rear crossbar sits where you can get the nose of the kayak guided onto the rear saddle fairly easily so the kayak can be pushed into place. Load straps and bow/stern tie downs are…

view full answer...

What Type of Rollers Can be Used with the Thule Goalpost TH997

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching