Can Sticker be Removed on the Curt Trailer Hitch Receiver # C13182

Question

Question:

I want to buy Curt 13182. I see use/load/cautioninch labels/stickers on the installed hitch on your pics. I dont want any stickers showing. Are they all removable? Not like permanent orange sun visor stuff. Thanks for an early reply.

asked by: Jack P

1

Helpful Expert Reply:

The sticker on the Curt Trailer Hitch Receiver # C13182 is removable, but I strongly recommend against doing so. The sticker contains important information like the Tongue Weight (TW) and Gross Trailer Weight (GTW) ratings. Although I understand the desire to have a clean looking trailer hitch receiver, the sticker not only has the important information but it also serves as a reminder of the proper way to use the hitch receiver.

If you were to get pulled over and didn't have the sticker on the hitch to prove the weight capacities it could result in a fine.

expert reply by: Jon G

1

Bobby O.

10/1/2024

Hi Jon G. Do you know if it's possible to get a replacement sticker for a class 4 hitch, the hitch is new but the sticker is damaged. Thankyou Bobby

Jon G.

10/2/2024

@BobbyO That's something you'd have to reach out directly to the manufacturer for. I think they might, but you'd probably have to provide proof of purchase and such so they can verify it's the correct sticker and you wouldn't be accidentally mislabeling the hitch on your vehicle. If you have a Curt hitch on your vehicle then here is the site you'll need to visit - https://www.curtmfg.com/contact

Bobby O.

10/2/2024

@JonG Thanks Jon, I reached out to Curt, they will send me a replacement sticker just need to provide them with pic's and order receipt. Thanks for your help Bobby O

Jon G.

10/2/2024

@BobbyO Thanks for the follow up! Glad to hear they are able to help you out with this!

Answer 1

No, the Replacement Mounting Hardware #C75JR is not going to fit the Curt Class III Hitch #C13135. If you are in need of a hardware kit for the #C13135 hitch, we can provide that with Part #RHK. When you go to the page for #RHK you will see a box…

view full answer...

Answer 2

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 3

Hey Timothy! We can definitely get you the parts you need to flat tow your 2022 Grand Wagoneer. For a Blue Ox setup I recommend the following: -Blue Ox Base Plate Kit #BLU66XR (If you DO NOT have tow hooks) -Blue Ox Base Plate Kit #BLU46CR (If you DO…

view full answer...

Answer 4

Hey David, The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR accepts brake lines with 3/16" male inverted flare fittings with a 3/8"-24 thread size like the DeeMaxx Hydraulic Brake Line #DE38GR.

view full answer...

Answer 5

Hey Scotty, thanks for reaching out! I contact my tech guy at Lippert and this is what he said in regards to your situation: "There are a few things that will affect the hitch height. The first thing is when unhitching from the tow vehicle…

view full answer...

Answer 6

No, I am sorry Carey they do not make an adapter for an actuator like the Dexter DX7.5L A-60 item #DX56FR that spins. You'll have to remove your brake line, install it on the actuator, and then reconnect your brake line to get it connected. How…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hello John, thanks for reaching out. I double checked with Yakima and according to them the FullBack bike rack will not fit a 2024 Jeep Grand Cherokee 4xe. Sadly, there is no trunk mounted bike rack that has been confirmed to fit this vehicle. The…

view full answer...

Answer 9

I have exactly what you need to replace the 4 and 7-way trailer connector and wiring harness on your 2002 Ford F-150. In order to do this you are going to want to use both the Ford Replacement OEM Tow Package Wiring Harness part #118242 and the 7-…

view full answer...

Answer 10

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 11

What you read was true in most cases but you do not need an adapter. What you need is the Replacement Shank for Gen-Y Adjustable Ball Mount item #325-GH-304. This has four stacked 2" receivers that will allow you to mount your motorcycle carrier…

view full answer...

Answer 12

When we installed the Curt Receiver #C38JR we measured the inside height of the receiver at 12" where the Draw-Tite Receiver #DT79GR measured at 11-1/2". The Adapter #C26FV you found is only rated for use with tow bars as it was not…

view full answer...

Can Sticker be Removed on the Curt Trailer Hitch Receiver # C13182

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching