This pin box serves as a direct replacement for the worn-out Lippert 1621HD pin box on your fifth-wheel trailer or RV. Rust-resistant, powder coated steel construction. Easily bolts onto trailer with existing hardware.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, Randy here at etrailer.com. Today, we've gotten a 2010 Starcraft Homestead, and we're going to be switching out the pin box on it. This is a new pin box. We'll show you the installation process in a minute. But essentially this is going to be from Lippert components. This is the direct replacement.
This one uses a 1621 pin box. Now, Lippert has this in a standard. They've got it in an HD and then a SHD which would be super heavy duty. Now on the standard duty model, it's going to have a 15,500 pound capacity. The heavy duty which we've put on here is the 18,000 pound, and the super heavy duty is going to go to 21,000 pounds.Overall, this is going to be an exact replacement for what you've got on there now.
Just restores everything, gets our king pin back to where it's round in case we've had any damage there. And it will include the mounting brackets that actually attach up to your fifth wheel. So maybe you've backed into it and you've bent it or damaged it one way or another and you need a new solid bracket to mount, that's going to come with it as well. Or if maybe you're rebuilding a trailer, whatever your case might be. But it's nice heavy duty, steel construction, has that nice black powder coat finish on it.
And the installation process isn't all that difficult. It's a little bit off way that it'll pull down on the front more so than in the back. But two guys can very easily, once you remove your bolts, lower this down and out, get your new one up and in, and it comes with the new hardware to attach it, so you're not going to be reusing the old hardware.When working with customers, they often ask, "How do I know which pin box I need or which one's going to be the right one for my camper" Basically, on all your pin boxes, you're going to have a stamp series of letters and numbers on the side of it, that's what you want to use to reference which one's going to be the right one for your application. Now, of course, it's a king pin that we use connect a trailer to a truck, so it's extremely heavy duty has a nice black, powder coat finish on it, helps to withstand any of the elements out there. This is going to be a direct replacement.
So this is the exact thing that generally is going to come on your 1621 Eclipse camper or your 1116.The one thing to keep in mind is, oftentimes people will upgrade these. So this is a standard, just a steel link, right Some of them have airbags on them. So if the ride quality that you've been experiencing isn't what you want, or if you get some of that weight coming down the back of the truck and you can feel it through the truck, adding a pin box or upgrading, instead of getting this one, maybe get one that has the air-ride, like the 5th Airborne. That'll give you an air cushion in there. Or the Gen-Y, a really nice king pin that'll connect to a fifth wheel, and has like a torsion axle built into it. Both of those are really good options as well. But if you've been pleased with the quality you've had and you don't have any complaints, I think this is an excellent replacement.Now, the replacement process isn't that involved, you just got to remove some bolts, get the old one out, new and in and put some new bolts in. These can be a little bit heavy, so I recommend having two guys when you go to actually pull it out and place it back in. Let's take a look at that process now. Of course, we need to get our old pin box out of the way here. You want to inspect it first. You can see here, we've got our breakaway switch that's attached, so we're going to be removing that self-tapper to get that out. Check your wiring, to make sure that it doesn't run through one of the holes on the pin box or something. And then also check your 7-pole plug. This one runs up in end, so we're in really good shape there, nothing's attached to the pin box. But sometimes the 7-pole will be ran to a junction box on the pin box, then it goes back from there. So just really inspect it properly, make sure you're not going to be doing any damage to the wiring. And then we'll take out the main bolts here and get our old one out of the way.We'll start on our larger bolts here. It's going to be a 15/16, just keep that in mind. (silence). You can see as I'm removing these, I'm leaving some of them in here. They don't have nuts or lock washers on them, but once I get this last one loosened up, I don't want the pin box to fall, so that's just there as a fail safe, just to hold it for us. Once we get an extra set of hands, we can pull those out and take this one out.Now with the help of an extra set of hands, we're just going to start wiggling this guy out of there. You can see, fairly easy for one guy to hold, a little bit heavy, but you'll be able to manage. Set it aside and get our new one in place. Now, we've got our new one coming in. With doing this, we're also going to use the new hardware. I know we had good hardware that was there before, but I like replacing it when we get the opportunity. You can see it takes a little bit of force to get them in there sometimes.Now that we've got all of our bolts and hardware started, remember we're going to have the bolt with a flat washer on the outside. On the inside, there's a lock washer and a nut. We're going to get all these snugged down, then we can torque them down appropriately. (silence). Then on the side on our breakaway switch location, we use a self-tapper to get that in place.Well, guys, I hope that was helpful. Shows you how to get the pin box out and how to get the new pin box in and some of the details on it. Again, that's going to complete our look at the 2010 Homestead by Starcraft pin box replacement.
It’s gonna be perfect for white. I want to use it for.
Looks good and like the additional support plates with it.
Excellent service and fast delivery. Thank you so much
Installed without any issues
The hitch is what we needed. Thank you.
Cheapest price I found, shipped immediately. I will use this Company from now on.
Product was exactly what we needed. Crystal was very helpful and answered all of our questions.
Works just like it should very heavy bu ilt
Very quick delivery. Looks like it should replace the original very nicely. I have removed the old one but need to wait for some help to lift the new one into place. I don't anticipate any problems.
Exact fit, easy install very happy!
These people are the greatest at making sure you get what you want and need.
It fit perfectly. Identical tot the old one.
drove it around town to test it, worked great
Do you have a question about this 5th Wheel Pin Box?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.