Replacement Hardware Kit For The Curt Class III Trailer Hitch # C13135

Question

Question:

Does this kit fit on the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2inch Item # C13135?

asked by: Jeancarlo V

0

Expert Reply:

No, the Replacement Mounting Hardware # C75JR is not going to fit the Curt Class III Hitch # C13135. If you are in need of a hardware kit for the # C13135 hitch, we can provide that with Part # RHK. When you go to the page for # RHK you will see a box where you will need to enter the item number for the hitch that you have. Just enter the part number C13135 in this box before you add the RHK to your cart.

expert reply by: Jesse M

0

Answer 1

The Curt Trailer Hitch Receiver #13333 requires the following hardware. Flat-head socket bolt, 3/4"-10 x 3-1/4", grade 8 Qty. 1 Carriage bolt, 1/2"-13 x 1-1/2", grade 8 Qty. 2 Square-hole spacer, 1/4" x 1-1/2" x 3"…

view full answer...

Answer 2

For your Curt #C13416 you will need the Replacement Hardware Kit for Trailer Hitches #RHK. This does not come with the hitch pin clip so you will need #C21510 or #C21500.

view full answer...

Answer 3

While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch…

view full answer...

Answer 4

The Curt Class III trailer hitch for your Pathfinder, part #C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during…

view full answer...

Answer 5

While both fit your 2020 Toyota Prius, the biggest differences between the Saris Bones 2 Bike Rack #SA805BL and Saris Bones EX 2 Bike Rack #SAR83FR is the latter has an added top anchor leg for more stable mounting, as well as strap management so you…

view full answer...

Answer 6

I looked in the owner's manual for a 2021 Kia Seltos but there was no mention of trailer towing so I must refer you to the manufacturer. If towing is allowed then we have everything you need to get started. The trailer hitch is the first thing…

view full answer...

Answer 7

If a bolt will not torque down while installing a trailer hitch this means the bolt was likely cross threaded. There are a few options to fix this, the first would be drill out and then re-tap the hole with the next largest thread size using a kit…

view full answer...

Answer 8

No worries, the Curt Trailer Hitch Receiver, #C65FR is a no drilling needed installation. This is a bolt-on installation with no welding required or drilling of new holes. It uses existing factory hardware to be mounted to holes that already exist.…

view full answer...

Answer 9

The nut you referenced for the etrailer Trailer Hitch Receiver #e98905 for your 2017 Toyota Tacoma is a grade 8 1/2"-13 hex flange nut. While we do not offer them by themselves, the are included in the Replacement Hardware Kit #RHK. All you will…

view full answer...

Answer 10

Nope; your 2023 Kia Seltos can 100 percent use the Thule EasyFold XT Bike Rack #TH903202 with the Curt Trailer Hitch Receiver #C65FR. I can certainly see where you're coming from with your analysis, but the 200 lb tongue weight capacity of the…

view full answer...

Answer 11

The Draw-Tite Class III hitch, part #76170 installs using 6 M12 1.25 x 35 bolts, so you'd need an M12x1.25 tap. Before trying to chase the threads, you'll likely have success just giving the threads a good scrub with a spray lubricant like…

view full answer...

Answer 12

Any certified mechanic can install a trailer hitch as most just require bolting to your vehicle's trailer frame. If you let me know the year of your Chevy Trax and what you plan on using it for I'd be happy to recommend the best one for you.

view full answer...

Replacement Hardware Kit For The Curt Class III Trailer Hitch # C13135

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching