Dimensions Of The Trailer Tipper Latch by Dutton-Lainson Item # DL13353

Question

Question:

Could you give me the dimensions of this part. I already have the Uinch frame piece the latch goes through welded to my trailer. I need to know is the rest will fit. Thank you.

asked by: John H

0

Expert Reply:

I went out to our warehouse and measured the Trailer Tipper Latch by Dutton-Lainson part # DL13353 for you. The dimension of the latch portion of the component is as follows:

The top part of the latch is 4" long and 1/2" wide. The metal slide attached to the latch is 1/4" thick and has a length of 1-1/2" long x 3/4" wide.

I have attached two pictures that will further depict these measurements.

expert reply by: Conner L

0

click to enlarge

Answer 1

It's not the greatest quality picture, but I did attach a picture that shows how a tipper latch like the part #DL13353 will install on a tilt trailer.

view full answer...

Answer 2

I have a solution for you but I'm not aware of a bolt on safety chain bracket or clevis. However you can simply take a safety chain set like the 42" Long Safety Chain with 3/8" Clevis Hook (15,000 lbs) #337BSC3842 and use a grade 8 bolt…

view full answer...

Answer 3

I may have a solution for you but I'm not aware of a bolt on safety chain bracket or clevis that can be used. However you can simply take a safety chain set (or your existing chains) like the 42" Long Safety Chain with 3/8" Clevis Hook…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Dimensions Of The Trailer Tipper Latch by Dutton-Lainson Item # DL13353

Product Page this Question was Asked From

Continue Researching