Recommended Trailer Hitch Receiver For Mazda 3 Hatchback

Question

Question:

Hi, I am looking for a hitch to be installed in a Mazda 3 the hatchback car, not the small CX3. Do you have a product that fits that car? THANKS!

asked by: Edgar M

1

Helpful Expert Reply:

We do have trailer hitch receivers compatible with the Mazda 3 hatchback.

For 2014-2017, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24914. For 2010-2013, I recommend # 24843. For 2004-2009, I recommend # 24816.

If you want wiring or ball mount recommendations, let me know the year of your vehicle for a confirmed fit.

expert reply by: Jason S

1

Answer 1

You have done your research. As you have seen, all of the hitches for the 2010 Mazda 3 are Class I trailer hitches. The Draw-Tite and Hidden Hitch models do have the safety notch in them that prevent the insertion of a Class II accessory. This is so…

view full answer...

Answer 2

The U-Haul 5x8 Cargo Trailer has a suggested coupler height of 18". Therefore, you'll want to take this measurement and subtract this from the distance from the ground to the top inside edge of the receiver on the vehicle. The difference…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Trailer Hitch Receiver For Mazda 3 Hatchback

Featured Help Information

Miscellaneous Media

Continue Researching