Installing Curt Echo Brake Controller with 4-Pole to 7-Pole Adapter on 2003 GMC Sierra

Updated 06/21/2017 | Published 06/20/2017

Products Featured in This Question

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1836)

$289.95

10 Gauge Wire - Blue Primary - Per Foot

(108)

$1.61

40 Amp In-Line Circuit Breaker - Perpendicular Mount Bracket

(98)

$9.89

Question:

I recently installed a 4 to 7 pin adapter but did no run the extra wires except for the ground wire. If I buy pat C51180, wireless break controller, do I still need to run those extra wires from the 7 pin system?

asked by: Garrett

Helpful Expert Reply:

Since you have already installed a 4-Pole to 7-Pole Adapter like the # 37185 on your 2003 GMC Sierra, you will only need to run the black 12-V power wire from the adapter to the positive battery terminal to install the Curt Echo Trailer Brake Controller # C51180.

You will run the wire to the positive battery terminal via a 40 amp circuit breaker like # 9510. You will also need a length of 10 gauge wire like # 10-1-1 (sold by the foot) to reach this distance. The white wire will then just be grounded to the vehicle frame as you mentioned in your question.

I have included a diagram that might help you picture which wires are needed from the 7-Way and where they connect. I have also included a video demonstration and the written manual for the Curt Echo that you can take a look at.

expert reply by: Chris R