Trailer Tire Sizes That Fit on 15 x 6-Inch 6-Lug Wheels

Question

Question:

I have a 15inch 6 lug Jayco factory aluminum wheel , are they all rated at 2800# and 80 psi, looking to replace tires. Thanks

asked by: Grant

0

Expert Reply:

The 6-lug 15-inch trailer wheels we offer are all the 15 x 6-inch size; please see the linked page.

This wheel size can accept tire sizes 205/75-15, 225/75-15 and 7.00-15LT. Our range of these tire sizes is shown on the other linked page. We have both bias ply and radial tire options. You can click on the filters to select your tire size and the weight load range rating you need.

These various tires have different weight capacities and tire pressure requirements. For instance, Provider # TR20515D is a ST205/75R15 radial tire in load range D, rated for 2150-lbs at 65-psi pressure. This tire carries a speed rating M, good for up to 81-mph. For a 225/75-15 tire rated for 2380-lbs at 80-psi we offer load range E Kenda tire # AM10303, which is rated to 65-mph.

expert reply by: Adam R

0

Answer 1

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 2

The Malone MegaSport Kayak Trailer part #MPG535 has 86" long crossbars so it will be great for two kayaks and two bikes. That said, you may have to transport the kayaks on their side depending on their width. I have attached some carrier options…

view full answer...

Answer 3

I was saying the exact same thing just a couple years ago! Fortunately, there are actually a couple RV E-bike racks that came out recently to answer this demand. First, I'll address the hitch adapter. While there are hitch adapters like the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Trailer Tire Sizes That Fit on 15 x 6-Inch 6-Lug Wheels

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching