When you’re hauling real weight, this steel wheel is up for the job. The Dexstar Steel Mini Mod Trailer Wheel measures 15" in diameter by 6" wide and carries a 2,860-lb capacity. The sturdy steel construction and DOT compliance mean it’s built to handle frequent use under load without flexing or fatigue.
Moisture and road grime can take a toll on untreated steel, but this wheel holds up thanks to its corrosion-resistant finish. A durable white powder coat seals over an e-coat primer, keeping rust at bay through wet weather or long storage periods while maintaining a clean look.
Getting the right fit matters for proper alignment and balanced towing. This wheel uses the common 6 on 5-1/2 bolt pattern, a pilot diameter of 4.27", and a zero offset for solid tracking and predictable handling. Wheel bolt size is 1/2"-20, pairing easily with standard hardware for straightforward mounting.
This wheel is rated at 80 psi, giving you flexibility to run higher pressure tires without worry. Use it with valve stem # AM20904 for best performance and to maintain full pressure capability. The combination supports dependable inflation control when loaded or on long hauls.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we take a look at this Dexstar 15-inch by 6-inch white modular steel trailer wheel with a six on 5-1/2-inch bolt pattern. Now this wheel is a sturdy steel construction and we mentioned it is the modular design. And when we say modular design, that's the one that has the round holes all the way around the wheel. This gives you excellent corrosion resistance 'cause they use a two-step finishing process, which includes an E-coat primer and then a white powder coat finish. This is a high-quality wheel, does meet the DOT, Department of Transportation, specifications.
Now if you notice the center cap is not included. If you do want a center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole. 'Cause when you install your center cap, it will go through this hole. The pilot hole diameter here is 4.27-inches.
Now this wheel is made in the USA. A few dimensions on this. We're gonna measure the diameter and the width. And when you measure the diameter on a wheel, which you're measuring is inside to inside, basically, when a tire is put on here, the bead seat seals right here. So you're measuring from one bead seat to the other.
So inside the inside, if you put a tape measure on it, you can see there's your 15-inch diameter. The width on the wheel, it's gonna be the same way. You're measuring bead seat to bead seat. So inside the inside. There's your 6-inches width.
The bolt pattern on this wheel is a six on 5-1/2-inch bolt pattern. And if you wanna measure that on a wheel like this, that's an even number of lugs, six lugs. If you notice the lug holes are directly across from each other, so it makes it very easy 'cause all you have to do is measure from one hole to the other hole. So you can pick any hole, let's say this one, measure from the center of it to the center of the hole right across from it. On this, it'll measure 5-1/2-inches. So this means it's a six lug, 5-1/2-inch bolt pattern. Does use a wheel lug size of a 1/2-inch by 20, and the weight capacity on this wheel is 2,860 pounds. But that's going to do it for a look at the Dexstar 15-inch by 6-inch white modular steel trailer wheel with the six on 5-1/2-inch bolt pattern.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.