Trailer Hitch Recommendation for Toyota Tundra that Fits with or without Tow Bumper

Question

Question:

I need a class iv hitch to replace my factory installed hitch that has rusted out. My current factory hitch has the bumper integrated in so am confused about your offerings. 2006 toyota tundra. I dont understand what is meant by the statements excluding and with factory towable bumper. Thanks.

asked by: Phil B

0

Expert Reply:

The good news is that the Curt hitch part # 13184 is a fit for the versions of the 2006 Toyota Tundra with and without the factory tow bumper so either way it will fit and work well.

I attached an install video for more info for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Hey Mike! When you say you have the tow package option I'm assuming you have the factory hitch. None of the hitches will fit your Tundra as is since the factory hitch is tied into the rear bumper and bumper brackets. You will have to replace the…

view full answer...

Answer 2

I do have an option for you but the Draw-Tite Trailer Hitch Receiver part #37130 will not work for you. The factory towable bumper has different brackets than the non-towable bumper which interferes with the installation of this hitch. Instead, I…

view full answer...

Answer 3

Thanks for reaching out, those factory bumpers are a unique situation but I have a solution or two for you: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13184. *Westin Fey Surestep Rear Bumper - Black Powder Coated Steel #61001.…

view full answer...

Answer 4

I cannot find any reference to the part numbers you provided online. The Curt #C13180 Class III receiver hitch is a confirmed fit for the 2000-2006 Toyota Tundra. If you're needing the bolt hole spacing of the #C13180 that you'd looked at,…

view full answer...

Answer 5

All of the trailer hitches we have for your 2003 Toyota Tundra mount directly to the frame and don't use the brackets that the factory hitch and bumper use. So for your application I recommend replacing your OEM bumper with the Sport bumper since…

view full answer...

Answer 6

Hey Steve. The torque specs for the Curt Hitch item #13184 are 86 ft-lbs for the M12 hardware and 110 ft-lbs for the 1/2" hardware. This hitch is confirmed to fit the 2000 Toyota Tundra. I've linked the installation instructions and a video…

view full answer...

Answer 7

The trailer hitch that fits to the frame of your 2006 Toyota Tundra with the least amount of drilling is part #C13180. This only has 6 mounting bolt holes. The Curt hitch is a confirmed fit if you do not have the factory towable bumper. If you have…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Trailer Hitch Recommendation for Toyota Tundra that Fits with or without Tow Bumper

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching