How to Correct Weak Ground Connection on Vehicle and Trailer
Updated 05/25/2017 | Published 05/24/2017
Question:
I have a trailer that works sometimes and sometimes dont. The brake lights or turn signals dont even work but if I hit a bump they come on. I put some grease on the ball and try to ground the trailer to itself but nothing only if I drive and hit a huge pothole will they come on. When the did come on, they worked for a while. Then they went off once I took it off the ball. Could it be my ball is too rusty and does not have enough grease on it? my hitch has rust on it, could it be that? Its a Wells Cargo trailer.
asked by: Thomas H
Expert Reply:
A hitch ball does not make a good ground connection for trailer lighting functions. The fact that the lights work for a bit after you hit a bump with the hitched trailer tells us that somewhere in your trailer and vehicle wiring there is an intermittent ground connection. This kind of problem usually has a fairly simple fix.
I suggest you locate the tow vehicle's wiring harness ground wire. This white wire needs to be firmly attached to a clean bare metal surface on the vehicle. On the trailer the same is true for the main ground wire there. Both need to make bare metal-to-metal contact with the vehicle and trailer frames in order to give you a good ground. A weak ground may sometimes let one light function work but not another.
You can sand off the existing grounding points to remove rust, paint, primer, grease and dirt and then re-attach the ground wires to that clean surface. Apply some dielectric grease like # 11755 to those new connections to help prevent water and dirt from causing corrosion in the future.
Product Page this Question was Asked From
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals - Chrome - Vehicle End
- Shop: Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
- Q&A: Diagnosing, Locating and Repairing Trailer Ground Problem
- Q&A: Does Trailer Lighting Ground Through the Hitch Ball
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Search Results: modulite
- Q&A: Adapting 5-Way Round to 4-Way Flat for a Motorcycle
- Q&A: Testing Trailer Wiring Converter Box to Determine if it is Damaged
- Q&A: Troubleshooting LED Trailer Lights Blinking and then Not Working at all on a Boat Trailer
- Shop: 2" Round Grommet - Flush Mount - Open Back
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Shop: Optronics LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Round - Red Lens
- Q&A: Can a Stainless Steel Stud be Used as the Ground Stud on Optronics LED Clearance Light
- Search Results: tow~pro liberty
- Shop: Trailer Hitch
- Video: Fifth Wheel Towing Made Simple with Daniel
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer tires and wheels
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer jack
on Accessories and Parts
