Will Replacement BOLT Lock Cylinder for Tailgate Handle BL709231 Work with 2012 Chevy Silverado

Question

Question:

Will this fit a 2012 2500hd silverado?

asked by: Dustin K

0

Expert Reply:

As long as your truck's key looks like the key in the picture I attached the part # BL709231 will work great for you.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hello Charles, thanks for reaching out. The Replacement BOLT Lock Cylinder for Tailgate Handle #BL709231 is the cylinder only and does not include the retainer clip. Sadly, we do not offer the retainer by itself so your best option here will be to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Answer 4

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

view full answer...

Answer 5

We do have some tailgate lock options for your 2004 GMC Canyon. But Replacement BOLT Lock Cylinder #BL709231 will not work with the 2004 GMC Canyon. It isn't necessarily because of the lock or truck but because it does not accept the 2004 Canyon…

view full answer...

Answer 6

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes. If not you will need item #BL7022698.

view full answer...

Answer 7

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

view full answer...

Answer 8

Your 2008 Chevy Silverado would be considered a late model GM truck so the replacement lock cylinder part #BL709231 would be a fit.

view full answer...

Answer 9

The 2nd generation of the GMC Sierra ran from 2007 through 2013, so it's likely the wire location and color are the same. You'll want to test the wire just to be sure though. That being said, I would actually recommend tapping into the…

view full answer...

Will Replacement BOLT Lock Cylinder for Tailgate Handle BL709231 Work with 2012 Chevy Silverado

Product Page this Question was Asked From

Continue Researching