How to Determine What Key the Replacement Lock Cylinder # BL7023480 Works With  

Thanks for the picture of the key you have! The Bolt Lock Cylinder part #BL692918 is a fit based on seeing that and knowing you have a 2002 Avalanche.

The Replacement Lock Cylinder for BOLT Toolbox Latch #BL7023482 is specific to Toyota keys. For your 2021 Ford F-150 that has the side cut key you will need the Replacement Lock Cylinder for BOLT Toolbox Latch #BL7025636. Remember that this lock…

The correct Replacement Lock Cylinder for BOLT Toolbox Latch for a 2017 Ford F-150 is part #BL7025636.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Mike, I believe you are asking about the height of just the blue spring of the part ##SS68DR SSR-623-40 which is 4 inches. Otherwise it sounds like you are asking about the distance from the top of the mounting bracket to the bottom of the spring…

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

With Curt Trailer Hitch Receiver #C15302 installed on a 2003 Chevy Silverado 2500 short bed the hitch will be in the same position as a factory hitch or at least within a fraction of an inch. By that I mean the receiver will be right under the rear…

Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

There are quite a few holes on the frame of your 2002 Chevy Silverado 2500HD short bed that hitches can attach to like the Curt you mentioned part #C15302. This is why the hitch fits for your truck have a few different bolt hole variations. I…

Hi Lester; the Demco Autoslide 5th Wheel Trailer Hitch #DM8550041 will fit your 2014 Ford F-150 with a 5-1/2' bed. You will also need the Underbed Rail and Installation Kit #DM8551001. If you happen to have the 6-1/2' bed you can use the same…