Tailgate Locks for a 2004 GMC Canyon

Question

Question:

Will this part fit my 2004 GMC Canyon tailgate lock cylinder?

asked by: Scott

0

Expert Reply:

We do have some tailgate lock options for your 2004 GMC Canyon. But Replacement BOLT Lock Cylinder # BL709231 will not work with the 2004 GMC Canyon. It isn't necessarily because of the lock or truck but because it does not accept the 2004 Canyon key.

We do have Pop & Lock tailgate locks # PAL1700 and # PAL1700C which are manual locks. Or you could use lock # PAL8160 which will work with power door locks to lock and unlock the tailgate.

expert reply by: Michael H

0

Answer 1

We sell locking tailgate handles for your 2005 Chevy Colorado like the Pop and Lock part #PAL1700 which would fit and work well but we do not have replacement lock cylinders for a factory tailgate lock.

view full answer...

Answer 2

I have an answer for you. Unfortunately, if the locking mechanism in the Pop & Lock Custom Tailgate Lock with Handle - Manual - Black #PAL1700 will not open, the only way is to break into the tailgate in order to remove the lock. We have had…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

view full answer...

Answer 5

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes. If not you will need item #BL7022698.

view full answer...

Answer 6

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

view full answer...

Answer 7

Your 2008 Chevy Silverado would be considered a late model GM truck so the replacement lock cylinder part #BL709231 would be a fit.

view full answer...

Answer 8

As long as your truck's key looks like the key in the picture I attached the part #BL709231 will work great for you.

view full answer...

Answer 9

Hello Charles, thanks for reaching out. The Replacement BOLT Lock Cylinder for Tailgate Handle #BL709231 is the cylinder only and does not include the retainer clip. Sadly, we do not offer the retainer by itself so your best option here will be to…

view full answer...

Answer 10

The 2nd generation of the GMC Sierra ran from 2007 through 2013, so it's likely the wire location and color are the same. You'll want to test the wire just to be sure though. That being said, I would actually recommend tapping into the…

view full answer...

Tailgate Locks for a 2004 GMC Canyon

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching