Using The E-Track Trailer Cargo Control # EM59150 On Trailer To Secure ATVs and Motorcycles
Updated 02/21/2011 | Published 02/20/2011 >
Products Featured in This Question
Question:
I have an enclosed 7 6 X 18 V-nose additional 6 trailer and want to primarly transport atvs. However, I would like to have flexibility with motorcycles or a combination of both. I thought about starting at the back of the trailer ramp door and install e track sideways over the floor beamsaluminum frame which are every 24 upt to the front of the trailer. Is this a good idea or do you have a better recommendation? How solid is this type of mounting when I use tie downs? Does e track hold well either way? Thanks for your assistance.
asked by: Vince
Expert Reply:
Installing the E-Track Trailer Cargo Control, part # EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer.
You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described. The E-Track can also be mounted on the wall of trailers, so perhaps you could mount the track for the ATVs on the floor towards the front of the trailer. Then you could mount track on the trailer walls for the motorcycles or on the floor as well. Either option will work, its just a matter of personal preference.
This type of mounting is very solid as the tracks can be mounted using screws, or rivets. If using screws, I would use a stronger grade screw like sheet metal screws.
Using tie-downs with the E-Track will work well. I would recommend either the E-Track Tie-Off Ring, part # 59131, or E-Track 2 inch D-Ring, part # E59143. You may also be interested in the Erickson E-Track Strap with Ratchet, part # EM59136, if you do not already have straps.
The E-Track Trailer Cargo Control, part # EM59150, would be a good option for keeping your ATVs and motorcycles secure when hauling on your trailer and will hold well.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 2' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 2 Feet Long
- Erickson
more information >
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Screws do You Recommend to Use with the CargoSmart X-Track Cargo Organizer?
- Q&A: What Gauge Metal is the etrailer Horizontal E Track Made of?
- Q&A: Recommended E-Tracks and Straps for Towing a 4,000 lbs Car
- Q&A: Are The Trimax Hidden Padlocks Available Keyed Alike?
- Q&A: What are the Overall Measurements of 4-Slot Horizontal E-Track - Zinc Plated Steel
- Q&A: Is 3/4 Inch Plywood Floor Adequate for D-Ring Tie Down Anchors with Backing Plate for 3,000 lb Car
- Q&A: How Big Is The etrailer Enclosed Trailer Transition Plate # e32JR?
- Article: Rust Prevention
- Article: Trailer Tire Sizing
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Overview of Lubricating Grease

