Are The Trimax Hidden Padlocks Available Keyed Alike?

Question

Question:

Can I get this lock keyed alike?

asked by: Stu R

0

Expert Reply:

Yes, we do offer the Trimax Hidden Padlock as a Single # TMX88ZR, 2-Pack # TMX63FR or 3-Pack # TMX73FR which all the locks in the package will be keyed alike. This style padlock works best on the Trimax Hidden Shackle Padlock Hasp # TMX28ZR but will work on other latches that accept a 3/8" diameter shackle pin.

expert reply by: Bud M

0

Tim

10/21/2025

I already have your locks on my trailer hitch how can I order more of them with the same number key

Jesse M.

10/21/2025

@Tim You can order a 2-pack or 3-pack of locks, and they would all come with the same key but there would not be a way for us to guarantee a specific key code or match it to what you have now.

Stephen

1/31/2026

I need 4 keyed alike is that possible??

Robin H.

2/2/2026

@Stephen you will have to contact Trimax directly, they can do that for you.

Answer 1

Hi Jeff; we only have one threaded grease cap that matches that outer diameter. The Valcrum Universal Threaded Aluminum Oil Bath or Grease Cap #VA95JR. This is designed to replace Dexter 21-88 or K71-704-00 oil caps on #13G drums manufactured after…

view full answer...

Answer 2

Hi Ross; you have some extra running light and ground wires on there right now which isn't uncommon. You can still use the Wesbar Wishbone Wiring Harness #002402 you were looking at, you will simply need to tie the ground wires and the extra…

view full answer...

Answer 3

The Dometic RV Water Heater part #DMC74FR will work great as a replacement for an Atwood GC6AA-9E. They are both gas and electric with a six gallon tank. It will allow you to reuse the existing door already on the trailer. The swap should be pretty…

view full answer...

Answer 4

The rebound clip is a pretty important piece on the leaf spring stack so I wouldn't really say it is okay to use your trailer without them. The rebound clips are designed to hold the leaf spring stack together so that when you hit a bump in the…

view full answer...

Answer 5

If it is necessary to cut the rails, I suggest you place the top piece into the side rails and measure from the top to the point that matches your desired length. Please look at image number 2 and compare to your particular camper. Can you place the…

view full answer...

Answer 6

I can help you get basically the same thing as the #7359765-EB but with the bolt pattern you need but we don't have it as a complete kit. You'd need the bare axle part #7359765, the hubs #84556UC3, and then the brake assembly set #23-26-27…

view full answer...

Answer 7

Hey Mike, The #IR29FR lock kit is not compatible to work with the B&W Pintle Hitch that you have. The pin diameters are different sizes and would not fit. The only kit we have that is confirmed to fit the B&W Pintle Hitch is the InfiniteRule…

view full answer...

Answer 8

From the pictures you sent in, it looks like the hinge assembly itself rusted through and ripped off. It seems like it may have been fabricated by the previous owner. That latch style is usually accompanied with a bar like with the Cam-Action…

view full answer...

Are The Trimax Hidden Padlocks Available Keyed Alike?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching