How Big Is The etrailer Enclosed Trailer Transition Plate # e32JR?

Question

Question:

What are the dimensions of the plate?

asked by: John

0

Expert Reply:

The etrailer Enclosed Trailer Transition Plate # e32JR is 15" long and the width can be adjusted from 48" to 102" using the included hardware and mounting holes.

expert reply by: Bud M

0

Answer 1

The etrailer Enclosed Trailer Transition Plate #e32JR is adjustable in width and has a width range of 4 foot to 8-1/2 foot overall.

view full answer...

Answer 2

Good question, Tina - you’re in the safe zone with the M-3 aluminum plate #M348FR. It’s 3/16 inch thick and fully welded across the piano hinge (some cheaper ones are just bolted instead of welded), so even with heavy mowers or small tractors, it…

view full answer...

Answer 3

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 4

Hello Robert, Yes, the only difference between the 2 is that the etrailer Enclosed Trailer Transition Plate #e32JR is quantity: 1, and the #e99RV is quantity: 2. Right now it looks like if you wanted a better deal to buy 2 of the #e32JR. It is times…

view full answer...

Answer 5

Hey Dylan - both M-3 plates measure 81-3/4 inches wide, so you'd need to trim off a little bit. The aluminum one #M348FR would be easier to trim, so I'd pick that over the steel one. The hinge runs the full width so you’ll still get solid…

view full answer...

Answer 6

Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…

view full answer...

Answer 7

Hello Sharman, thanks for reaching out. We don't have that exact SikaFlex 715 sealant in black, but we do have something very similar. Take a look at the following: - Alpha Systems 1021 Self-Leveling Sealant for RVs - Black - 10.3 oz - Qty 1…

view full answer...

Answer 8

Hey Sam! For your 2026 F-350 we have the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. The step will not interfere with the tie-downs so that won't be a problem. See the attached photo. You will also need the TorkLift Locking…

view full answer...

Answer 9

The etrailer Enclosed Trailer Transition Plate #e32JR is the only transition plate we carry and it does have a working load limit of 1,000 lbs. We have tested this transition plate extensively, and have found that it holds up well, even when loading…

view full answer...

How Big Is The etrailer Enclosed Trailer Transition Plate # e32JR?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching