Fit & Wiring Length of CE Smith LED Light Kit for Post-Style Boat Guide-Ons CE27656A

Question

Question:

The description of CE 27656A says it is 2inch diameter and the 60inch poles CE27640 says 2 3/8 inch pole diameter so what lights do I need to get that to fit CE27640? Also if they fit will the wires reach down the pole without splicing?

asked by: Kevin J

1

Helpful Expert Reply:

The specs for the CE Smith LED Light Kit for Post-Style Boat Guide-Ons # CE27656A note these lights fit on 2-inch diameter posts, but this is incorrect. The lights have an inner diameter of 2-3/8-inches which allows them to fit fine on posts like # CE27640. I went to our warehouse and measured both items. The light inner diameter and the post outer diameter match up at 2-3/8-inches. I will request the correction to this error. Thank you for catching it.

I also measured the length of the wiring on each light; that is 98-inches.

expert reply by: Adam R

1

Answer 1

Hi Cody; the TecNiq Low Profile Stop Tail Turn Light with Reverse #TN22TR you were looking at is a good option assuming you can attach the lights on the guide poles. These measure 15-1/2" long; 1-1/4" tall, 1/2" deep and mount on the…

view full answer...

Answer 2

To replace the caps of your CE Smith Guide Ons will require you to get the part #CE27656A. This is the only way to replace anything having to do with the lights of the guide-on.

view full answer...

Answer 3

The CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Long - I-Beam Clamps - White - Qty 2 #CE27648 are indeed an outer diameter of 2-3/8 inches. The LED Light Kit for Post-Style Boat Guide-Ons #CE27656A are often paired with this kit.

view full answer...

Answer 4

I'd agree with you. What you describe is exactly how I would install it. You'll want to use a grommet on the hole you drill in the galvanized arm to protect the wires from rubbing against the metal. You will also probably have a heckuva time…

view full answer...

Answer 5

The brown wire of your trailer wiring would be the one that carries the running light circuit. That would be the correct circuit to use for powering the CE Smith Post-Style Guide-Ons #CE27740. I attached an install video for this product for you to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 11

Hey Steven! The etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet #e93SR will be adequate for your 2020 Gulf Stream Vista Cruiser since the Dexter D40 number correlates to a 4,000 lbs hub and drum…

view full answer...

Answer 12

Hello Chad, thanks for reaching out. The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 will work fine with a StarCraft tri-toon, assuming you’ve got a pretty standard bunk-style trailer under it. We’ve put those on plenty of…

view full answer...

Fit & Wiring Length of CE Smith LED Light Kit for Post-Style Boat Guide-Ons CE27656A

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching