PVC Outer Diameter of CE Smith Post-Style Guide-Ons

Question

Question:

What is the diameter of the PVC tubes? This guide is listed as 2 3/8inch diameter and others are listed as 2. Is this description accurate for this model at 2 3/8 inch diameter PVC?

asked by: Donald J

0

Expert Reply:

The CE Smith Post-Style Guide-Ons for Boat Trailers - 60" Long - I-Beam Clamps - White - Qty 2 # CE27648 are indeed an outer diameter of 2-3/8 inches. The LED Light Kit for Post-Style Boat Guide-Ons # CE27656A are often paired with this kit.

expert reply by: Jason S

0

Answer 1

Hi Cody; the TecNiq Low Profile Stop Tail Turn Light with Reverse #TN22TR you were looking at is a good option assuming you can attach the lights on the guide poles. These measure 15-1/2" long; 1-1/4" tall, 1/2" deep and mount on the…

view full answer...

Answer 2

To replace the caps of your CE Smith Guide Ons will require you to get the part #CE27656A. This is the only way to replace anything having to do with the lights of the guide-on.

view full answer...

Answer 3

The specs for the CE Smith LED Light Kit for Post-Style Boat Guide-Ons #CE27656A note these lights fit on 2-inch diameter posts, but this is incorrect. The lights have an inner diameter of 2-3/8-inches which allows them to fit fine on posts like…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 9

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 10

Glad to hear you are liking the wheels, Wayne! With the lug holes being a bit recessed on the Kenda #KE22XJ you got, I recommend going with the DeeMaxx Trailer Wheel XL Lug Nut - Chrome - 1/2" - Qty 1 #DE23KR. This is 1-7/8" long and fits…

view full answer...

Answer 11

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 12

Welcome back, Ian! With a 3,500 pound Dexter E-Z Lube using the #L68149 inner bearing, you will want the Bearing Buddy Spindle Grease Seal Set #BB60002. This does also include the seal as well as the wear sleeve and will fit your 3,500 pound Dexter…

view full answer...

PVC Outer Diameter of CE Smith Post-Style Guide-Ons

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching