How Tall is the Trailer Hitch Mount for Stromberg Carlson Extend-A-Line # CL-01-02

Question

Question:

How far above the bumper will the add a line sit?

asked by: Mary

0

Expert Reply:

Trailer Hitch Mount for Stromberg Carlson Extend-A-Line # CL-01-02 measures approximately 26 inches from the top of the receiver opening on the hitch to the space between the 2 bolts at the top of the vertical part based on my estimates.

The trailer hitch mount was designed to work with Extend-A-Line drying racks # CL-36 or # CL-27.

expert reply by: Michael H

0

Answer 1

I have an option for you, but custom fit floor mats from WeatherTech are not available for any Class A motorhome. Take a look at the WeatherTech All-Vehicle Mat #61-11AVMOTHSG, instead . These universal floor mats can be trimmed with a pair of sharp…

view full answer...

Answer 2

Hey Tom, the square tubing of the #CL-01 is 2 inch by 2 inch and the gauge is 16.

view full answer...

Answer 3

The Mounting Post for Stromberg Carlson Extend-A-Line RV Mounted Drying Racks - Square Bumper or A-Frame #CL-01 you were looking at is 44" long as shown in the included diagram. While not designed to be used with a backup camera, it will give…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How Tall is the Trailer Hitch Mount for Stromberg Carlson Extend-A-Line # CL-01-02

Product Page this Question was Asked From

Continue Researching