Does Kodiak Disc Brake Kit # KHR12D Fit all 6k Trailer Axles

Question

Question:

Will these fit any 6k axel? Im starting to travel a lot and want a hub for a replacement. My trailer is a 2004 Vanguard. 6k axis axels, 12inch disc brakes, and 6 lug.

asked by: Tyler

0

Expert Reply:

If you have a standard 6k trailer axle the Kodiak kit part # KHR12D is going to be a fit for it. Easiest way to check is to pull the hub off your current axle and check the bearing numbers in it. If they are # 25580 and # 15123 (which this kit does not supply), then this would fit and work well for you.

The other way to check is to measure the spindle where the bearings ride. If the dimensions are 1.73 and 1.38 inch this kit would fit.

expert reply by: Jameson C

0

Answer 1

Thanks for the photo; I can't say for certain if the lug can be replaced or not, but in order to find the correct replacement all you'd need to do is measure. For example, the Kodiak Wheel Bolt #K12WB2 is for Kodiak integral hub-and-rotor…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 7

For your Nuwa Hitchhiker 5th wheel, I recommend you start with the Kodiak 12" Hub-and-Rotor Assembly - 6 on 5-1/2 #KHR12D. For this assembly you will need the bearing kit #Bearing Kit #BK3-100. For your grease caps you will need #RG04-060 which…

view full answer...

Answer 8

You can use a battery charger such as the NOCO Genius Battery Charger and Maintainer #329-GENIUS5 to charge a set of batteries that are wired in parallel however, the first battery will charge first. Once the first battery is charged it will then…

view full answer...

Answer 9

Hey Richard! Hydrastar manufactures their own brake calipers and rotors. Kodiak is made by Dexter so the item #HYD74VR kit is not mixed and matched amongst the two companies products. All of the kits use standard ceramic brake pads. The Hydrastar…

view full answer...

Answer 10

Hi again David; since TDE is no longer around replacement brake pads are not available for the 46304. However, to avoid complete replacement we have found that the Kodiak Disc Brake Caliper #KDBC225DAC will work as a replacement for the 46304. If you…

view full answer...

Answer 11

Ernest, I completely understand why you are asking before ordering because once you get into the heavier #13 Torflex axle setups, a wrong fit can turn into a frustrating and expensive project pretty quickly. Dexter does not currently offer a…

view full answer...

Answer 12

I spoke with my contact at Kodiak and he said that yes you can turn the disc brake hub/rotor to remove the rust and pits. Etched into the backside of the rotor there will be a minimum width clearance or minimum rotor thickness that you can turn to.

view full answer...

Does Kodiak Disc Brake Kit # KHR12D Fit all 6k Trailer Axles

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching