Dimensions of RoadMaster Coupler Pin for Car-Mounted Tow Bars # RM-970032

Question

Question:

Can you tell me the diameter and length of RoadMaster Coupler Pin for Car-Mounted Tow Bars Item # RM-910032

asked by: Rich A

0

Expert Reply:

I went to the warehouse to pull the RoadMaster Coupler Pin for Car-Mounted Tow Bars # RM-910032 referenced in your question and I took a couple of measurements to get the dimensions you are looking for.

The length of the coupler pin is right at 3 inches. The diameter of the pin is just under 1/4 inches, 0.242 inches to be exact. I have attached an image with these dimensions labeled for you to look at.

expert reply by: Chris R

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Good morning Brett, Yes, the Curt Spectrum Brake Controller w/ Custom Harness - Dash Mounted Knob #C28SV and the Curt Echo Under-Dash Bluetooth Brake Controller w/ Custom Harness #C46GV will both work just fine in your 2026 Ram 1500 Rebel. They are…

view full answer...

Answer 3

Hey Jeff, thanks for reaching out. Yes, the Curt Echo Wireless Brake Controller #C51180 will absolutely work on your 2026 Ram 1500 Rebel. As long as it has the factory 7-way, the echo unit will work just fine. I'm not 100% sure why we don't…

view full answer...

Answer 4

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 5

Hi there Chris, great question. Yes the Redarc #RED87CR is truly a plug and play brake controller for your 2026 Ram 1500. It connects directly to the factory tow controller connector under the dash, so there’s no dealer programming required like you…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Shannon, at the time of me sending you this the anticipated ship date for the Curt front hitch part #C35RJ that you referenced is still October.

view full answer...

Answer 8

Hey, James! We do carry a Tekonsha harness that will work for you. Harness part 3024-P will fit your new 2026 Ram 1500 truck. We are in the midst of updating fitments for the 2026 year so our site may not show it has a fit but I've made sure that…

view full answer...

Answer 9

Welcome back, David! It looks like the port to plug your Curt Spectrum Brake Controller w/ Custom Harness - Dash Mounted Knob - Up to 4 Axles - Proportional #C28SV in is under the kick panel on the left side under the dash for the 2026 Ram 1500. From…

view full answer...

Answer 10

We do indeed have the exact bearing kit you need for your Lippert 5,100 lb axle with the part #BK3-300.

view full answer...

Answer 11

Hey Bob, welcome back! Yes the etrailer Soft Tonneau Cover #e36RV does fit your 2026 Ram Laramie with a 6-1/2 foot bed and the multifunction tailgate. How do you like the multi function tailgate?

view full answer...

Answer 12

Hello Brian, Thanks for writing in! The Curt Front Mount Trailer Hitch Receiver #C35RJ is going to be a great fit for your 2025 Ram 1500, we do have under tech notes that the tow hooks will need to be permanently removed. We do not receive an exact…

view full answer...

Dimensions of RoadMaster Coupler Pin for Car-Mounted Tow Bars # RM-970032

Product Page this Question was Asked From

Continue Researching