Recommended Trailer Hitch Receiver For 2010 Mazda 3

Updated 03/22/2017 | Published 03/21/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(37)

$210.94

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(215)

$74.04

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(667)

$15.80

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2634)

$16.89

Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs

(2336)

$31.14

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2281)

$46.11

Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit

(148)

$168.05

Question:

I need to buy a hitch for a Mazda 3 2010 if they have it thanks

asked by: Javier P

Expert Reply:

There are specific fits for a 2010 Mazda 3 for the hatchback vs. the sedan. If you have a sedan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11393. If you have a hatchback, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24843.

If you will be using this hitch for light towing, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118420 if you DO NOT have LED lights, and if you DO have LED lights I recommend the 4 Pole Harness and Hardwire Kit - Includes Tester # C59496.

For a ball mount, I recommend the Sportframe Drawbar 4" Rise 2000 lb Kit # 3594. for the Draw tite hitch, or the C45521 for the Curt hitch. Then you will need a hitch ball like # 19256 for a 1-7/8 inch ball or # 19258 for a 2 inch ball.

If you will be using a bike rack or cargo carrier, and you get the Curt hitch, you will also need the stabilization strap like # 18050.