Trailer Hitch Fit for 2013 Korean Built Elantra GT

Question

Question:

Will the Draw Tite #24905 or the Curt #C11400 fit my Korean built 2013 Elantra GT? I understand I will have to drill the holes, but will the hitch fit as is?

asked by: Nate H

0

Expert Reply:

The Curt hitch part # C11400 is our only hitch that fits the Korean models of the 2013 Hyundai Elantra GT Hatchback.

Some access holes will need to be enlarged and the exhaust will need to be temporarily lowered.

expert reply by: Jameson C

0

Answer 1

The Curt hitch part #C11400 is a fit for your 2014 Hyundai Elantra GT Hatchback that's made in Korea. For trailer wiring the part #C56233 is also a confirmed custom fit that would work well. The recommended ball mount is the part #C45521. For a…

view full answer...

Answer 2

We've confirmed that the Curt trailer harness, part #C56233, is a fit on the 2013 Hyundai Elantra GT. It plugs into the car's wiring behind both tail lights. Then there is a wire that needs to be run to the vehicle battery through an included…

view full answer...

Answer 3

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Trailer Hitch Fit for 2013 Korean Built Elantra GT

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching