Where Should Curt 7-Way Trailer Adapter # C57003 be Plugged Into 2011 BMW X5 Using Prodigy RF 90250

Question

Question:

I need to use an LED adapter like Curt Adapter C57003 with my 2011 BMW X5. Where would that adapter need to go when using this wireless brake controller? Between the X5 and the control box, or between the control box and the trailers wiring connector or would either place work?

asked by: Pat

0

Expert Reply:

You would need to plug in 7-Way Trailer Adapter # C57003 directly into the 7-Way connector on your 2011 BMW X5. That way it will take care of any bulb out and brake controller pairing issues when using the Prodigy RF # TK94FR.

expert reply by: Michael H

0

Answer 1

the only exclusions for the trailer hitches that fit the 2016 BMW X5, #75600 and #13077, is that they will not fit M models. For trailer wiring I recommend ZCI harness #119250KIT because with it you will not have to cut and splice into the vehicle…

view full answer...

Answer 2

We have one brake controller available for your 2013 BMW X5. It is the Tekonsha Prodigy RF Wireless Trailer Brake Controller, part #TK94FR, and since it is a wireless system does not require an adapter. It is an inertia-activated proportional system…

view full answer...

Answer 3

I recommend the ZCI Circuit Protected Vehicle Wiring Harness with Install Kit #119250KIT. nIt is the correct fit for your 2013 BMW X5 and will install with a new technology that does not require splicing into your BMW's wiring. I've attached…

view full answer...

Answer 4

Yes, we do! To install the Prodigy P3 Brake Controller item #90195 in your 2024 BMW X5 you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - BMW item #TK29FR.

view full answer...

Answer 5

This can be a fairly common issue with trailers that have LED lights being towed with a vehicle that also uses LED lights. The higher amperage being pushed through the wiring harness can cause lights to pulse and is usually a pretty easy fix.…

view full answer...

Answer 6

Yes, the adapter part #C57003 will fix any bulb out error codes on the dash of your vehicle caused by trying to tow a trailer with LED lights.

view full answer...

Answer 7

It sounds like you are looking for an adapter like the Curt 7-Way Trailer Adapter #C57003. This 7-Way connector will plug directly into your existing 7-Way socket so that it is able to recognize LED trailer lights. Factory tow package on many German…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Where Should Curt 7-Way Trailer Adapter # C57003 be Plugged Into 2011 BMW X5 Using Prodigy RF 90250

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching