Rhino-Rack Roof Rack for a 2013 Jeep Wrangler or Wrangler Unlimited

Question

Question:

Does the Rhino SG59 fit both the 2 door and the 4 door wranglers?

asked by: Erik H

0

Expert Reply:

There are 2 different Rhino-Rack roof racks; one each for the 2013 Jeep Wrangler and Wrangler Unlimited. If you have a 2-door Wrangler you would need to use # RRSG60. And if you have a 4-door Wrangler Unlimited use # RRSG59.

expert reply by: Michael H

0

Answer 1

Rhino-Rack roof rack #RRSG60 is for a regular 2015 Jeep Wrangler. Since you have a 2015 Wrangler Unlimited you would need #RRSG59. To maximize the free space on the roof rack I recommend using kayak carrier #S512 with expansion arm #RRS512X. This set…

view full answer...

Answer 2

I went to our warehouse and pulled one of the Rhino-Rack SG Roof Rack for Rain Gutters, part #RRSG60 and took a couple measurements for you. I have attached a photo that shows where I took the measurements you can check out. From the bottom of the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Rhino-Rack Roof Rack for a 2013 Jeep Wrangler or Wrangler Unlimited

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching