Trailer Hitch Receiver Compatible With Stow And Go On 2016 Dodge Grand Caravan

Question

Question:

Just want to make sure this will fit my 2016 Dodge Grand Caravan with Stow and Go Code 75579. My 2005 required a specific hitch for the stow and go model. Thanks...

asked by: Jim D

1

Helpful Expert Reply:

For your 2016 Dodge Grand Caravan, the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2" # 75579 is a confirmed fit. There isn't a specific hitch required for the stow and go on this model year.

If you will be towing with this hitch, I recommend the Curt T-Connector Vehicle Wiring Harness # C56331. This will clip in behind the tail lights to your factory wiring and will draw power directly from your battery so your system will be protected from excessive draw.

You will also need a ball mount, and I recommend the etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900. This will give you two different draw bar options with different rise and drop along with two different hitch ball sizes so you will be able to tow different trailers level. This kit comes with the pin and clip as well as a bag for storage when not in use. I've attached a video to help.

expert reply by: Jason S

1

Jennifer C.

8/9/2020

I have a 2015 dodge caravan stow and go will this hitch fit my vehicle??

Jon G.

8/20/2020

Yes, the Draw-Tite # 75579 will fit with the Stow and Go seats on your 2015 Grand Caravan.

Answer 1

Thank you for the kind words! There are indeed many hitches that fit both the 2010 and 2015 Dodge Grand Caravans. Both of these models years are part of the same 5th generation of this vehicle. Curt Class III hitch #13364 will fit both model years as…

view full answer...

Answer 2

The Curt hitch that is designed to fit your 2016 Grand Caravan is part #13364. This is a Class lll hitch and it has a 2-inch receiver opening. Curt does require the use of a stabilizing strap like part #18050 when you are using the hitch for any…

view full answer...

Answer 3

The hitches offered for the 2013 Grand Caravan and Town and Country set back under the rear bumper at a different distance. The Curt #13364 hitch has a 4 inch distance from the hitch pin hole to the rear most portion of the bumper, while the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch Receiver Compatible With Stow And Go On 2016 Dodge Grand Caravan

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching