Replacement Hubs and Drums and Brakes for Lippert 6,000 Pound Trailer Axles
Updated 03/06/2017 | Published 03/02/2017
Products Featured in This Question
Question:
I am needing to replace my 6000# lippert brakes and hubs. they are 8x6 1/2. what brake assmeblies will work for direct replacements?
asked by: Mike
Expert Reply:
Since you have 6K Lippert axles with an 8 on 6-1/2 bolt pattern for the wheels and hubs I assume that the inner bearing is 25580 and the outer is 14125A. It would be worth checking just to be sure. If you have regular axles with no grease fittings at each end then you can use # 8-219-4UC3. If you do have EZ Lube axles with the grease fittings use # 8-219-4UC3-EZ.
For either hub and drum assembly you can use right hand side brake assembly # AKEBRK-7R-SA and left hand side # AKEBRK-7L-SA.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hubcaps
- Search Results: hubcaps
- Search Results: center cap
- Search Results: 1/2 20 lug nuts
- Search Results: brake magnet
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 5.2K - 7K Axles - 12-15/16" - 8 on 6-1/2
- Video: Review of Dexter Trailer Hubs and Drums - E-Z Lube Pre-Greased Trailer Hub Drum - 42866UC3-EZ
- Video: Review of etrailer Trailer Brakes - Electric Drum Brake Kit - AKEBRK-6
- Article: Trailer Wiring Diagrams
- Shop: Americana Trailer Wheel Center Cap - 5.12" - Chrome
- Shop: Americana Trailer Wheel Center Cap - Stainless Steel - 4.88" to 4.90" Pilot
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter - Stainless
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Replacement Brakes and Hub/Drum Assembly for Dexter Axle 5.2K - 7K E-Z Lube Axles
- Q&A: Replacement Brake Shoes and Drums for a 2013 Keystone Montana Mountaineer with Dexter 7K Axles
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: All You Need to Know About the TruRyde Electric Brake Assembly
- Video: Complete Breakdown of the Replacement Phoenix USA Rear Wheel Center Cap w/ Pop Out
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles
- Q&A: Can Upgrading Axle Weight Capacity of Bigfoot 25B25FB Prevent Axle Failure
- Q&A: Hub and Drum Assembly for AL-KO T-52 Axle
- Q&A: Replacement Electric Drum Brakes and Drums for Sundowner Horse Trailer
- Q&A: Replacement Electric Trailer Brake Assemblies and Hubs For a Lippert 7,000LB Axle V000338732
- Q&A: Do Self-Adjusting Trailer Brakes Require Reversing the Trailer for Adjustment