Oil Filter Relocation Kit For 2016 Toyota Tacoma With 3.5L Engine

Question

Question:

Hi, Im looking for an oil filter relocation kit for a 2016 Toyota Tacoma with a V6 motor. 3.5 V6

asked by: Larry

0

Expert Reply:

From my research I saw the oil filter you use with your 3.5L engine on your 2016 Tacoma is 3/4-16 threads.

The oil filter relocation kit that will work for you is part # D15715. This kit comes with the adapter, mount, hose, clamps, and mounting hardware needed.

expert reply by: Jeffrey L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes. The Derale #D15715 has the same threads and can be used with your Briggs & Stratton 842921 oil filter, so you were on the right track.

view full answer...

Answer 4

I was able to find the thread size of your oil filter and it's 3/4-16 which means the relocation kit part #D15715 is the correct kit.

view full answer...

Answer 5

I went to our warehouse to measure the components in the Derale Oil Filter Relocation Kit #D15715. Both the filter mount and the adapter have a 3-inch diameter as noted on the attached photo.

view full answer...

Answer 6

The engine thread size of the Derale Oil Filter Relocation Kit #D15725 is 22 mm x 1.5 mm so if that's what you have this would fit and work well for you. The new filter you will need to use will have thread size 3/4"-16 so you will have to…

view full answer...

Answer 7

From what I was able to find, the 5.9 Liter Dodge engine uses a filter thread size of 3/4-16 and has an o-ring diameter of 2-3/4 inches. For these measurements you can use relocation kit #D15715.

view full answer...

Answer 8

I spoke with Derale and they informed me the spin-on adapter that comes with the Derale Oil Filter Relocation Kit part #D15715 is 1-3/4" tall/deep.

view full answer...

Answer 9

The Derale Oil Filter Relocation Kit you mention, #D15718 is not the correct oil filter relocation kit for you 5.9L motor, as the engine thread size is wrong. Part #D15715 uses the correct engine thread size, 3/4 -16 for your motor and will allow you…

view full answer...

Oil Filter Relocation Kit For 2016 Toyota Tacoma With 3.5L Engine

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching