Installation of Aftermarket Brake Control Harness on 2014 Ram 3500 with Factory Brake Controller

Question

Question:

I have a Ram 2014/3500 with a factory Brake Controller. Per your instructions for the 3023-P I have looked for but cannot find the truck side for this connector any place. If the vehicle comes with the factory controller is there a separate connector for the 3023-P or do you disconnect and use the one from the factory unit.

asked by: Bob D

0

Expert Reply:

To install the # 3023-P harness into your 2014 Ram 3500 you'll need to unplug the factory brake controller and use the same connector. Then the second 2-pin connector will normally be just above the brake pedal.

If you check out the linked video you can see this adapter being installed on a 2013 Ram pickup.

expert reply by: Charles S

0

Answer 1

I called my contact at Tekonsha and asked about replacing the Dodge Integrated Brake Controller if the truck is a 2010 through 2015. If you have a different year Ram just let me know and I can make some recommendations that will work for you. They…

view full answer...

Answer 2

Hey Robert, yes you would need the custom fit install harness part #3023-P to make the install of your Prodigy P3 part #90195 as easy as possible in your 2014 Ram 3500.

view full answer...

Answer 3

Brake controller wiring harness #3023-P is indeed a fit for your 2013 Ram 1500. If you do not already have a brake controller I recommend the P2 #90885. This controller is easy to set up and use and it is reliable. I have linked a video showing the…

view full answer...

Answer 4

I attached a picture that shows where the red wire installs of the brake controller install harness part #3023-P but the easiest way to find it will be to watch the video I attached that shows how to find it as well.

view full answer...

Answer 5

A local Dodge dealer will have to reprogram the truck to disconnect the factory brake controller. That will allow you to install an aftermarket brake controller like the Tekonsha Prodigy P3, #90195, which is an excellent brake controller by the way.…

view full answer...

Answer 6

To install an aftermarket brake controller like the Tekonsha Prodigy Brake Controller, part #90885, in your 2011 Dodge Ram 1500 with a factory Integrated Trailer Brake Module (ITBM) you will first need to disconnect ITBM. This will turn on a warning…

view full answer...

Answer 7

There isn't anything like an autonomous controller that would step up if the factory controller fails. I'd simply bypass the existing factory brake controller. The GM ITBC, although it works better now than the earlier models has been…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Installation of Aftermarket Brake Control Harness on 2014 Ram 3500 with Factory Brake Controller

Featured Help Information

Miscellaneous Media

Continue Researching