Do Hybrid Models of 2017 Toyota Highlander Require Special Install Steps

Question

Question:

Are there any different adaptors / adjustments for the 2017 Hybrid Highlander, trailer hitches.

asked by: Steve C

0

Expert Reply:

We have hitches for the 2017 Toyota Highlander Hybrid like the Draw Tite hitch part # DT65MR but they do not require any special install steps or adapters for the hybrid models like yours.

I attached an install video that shows how the hitch will install for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Draw-Tite Max-E-Loader Trailer Hitch Receiver #DT65MR referenced in your question, which is confirmed to fit your 2017 Toyota Highlander, can be installed by any qualified mechanic in your area without issue. If you feel comfortable enough with…

view full answer...

Answer 2

The ball measures 2-3/4 inches from the ball mount surface to the top of the ball. I am glad to see that you are making sure you get the proper ball mount for your tow set up. The rule of thumb is to be no more than 2 inches over or under. The…

view full answer...

Answer 3

The best towing setup for your 2017 Jeep Grand Cherokee is the Draw-Tite Trailer Hitch #75699, the Curt T-Connector #C55774, and the Redarc Tow-Pro Elite #RED44FR. The reason I the Draw-Tite #75699 is the best is because it features a hidden…

view full answer...

Answer 4

Hey there Barry, thanks for writing in, and I double-checked with the manufacturer and can verify for you the correct Coil SumoSprings for your 2018 Toyota Highlander 4WD (so long as it is not the hybrid version) are the 1145: - Coil SumoSprings…

view full answer...

Answer 5

I'm pretty sure you are correct that the Coil SumoSprings Custom Helper Springs #CSS-1145R will fit your 2018 Toyota Highlander, however, we haven't had the chance to test this out and SuperSprings doesn't have this listed in their…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Do Hybrid Models of 2017 Toyota Highlander Require Special Install Steps

Featured Help Information

Miscellaneous Media

Continue Researching