Will Tow Ready Vehicle Wiring Harness 118491 Fit a 2011 Honda Pilot EX-L

Question

Question:

Will this harness work for Pilot 2011 EX-L ?

asked by: Andrey S

0

Expert Reply:

Yes, the # 118491 T-One connector with upgraded circuit protected ModuLite fits all models of the 2011 Honda Pilot, including those with the EX-L trim package. It should work well for your application.

You can view the installation instructions for the wiring at the link provided, as well as a video showing it being installed on a 2010 Pilot.

expert reply by: Sarah L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Answer 10

Hey Jan, happy to help! Yes, the Kenda K353 Bias Trailer Tire #AM10068 will fit the Dexstar Steel Spoke Trailer Wheel #AM20122 . The tire size 5.30-12 is designed to fit 12" diameter wheels that are 4" wide and the Dexstar is a 12" x…

view full answer...

Will Tow Ready Vehicle Wiring Harness 118491 Fit a 2011 Honda Pilot EX-L

Featured Help Information

Miscellaneous Media

Continue Researching