Thule Mountaineer Lid Lifting Strut Replacement

Question

Question:

Hello I bought a Thule mountaineer box recently but found out the metal piece that is revited to the box is snapped off inside the hinge. Do you have the metal pieces on both sides as well as the hinge? Thanks

asked by: Seth T

0

Expert Reply:

The correct lid hinge for your Thule Mountaineer is the Replacement Dual Force Strut for Thule Roof Box, # TH14933. The Mountaineer is a discontinued product, so the only other parts we have are the Replacement Mounting Hardware for SportRack and Thule Cargo Boxes, # TH05603, I don't know if this includes the metal pieces you were referring to.

expert reply by: Jason S

0

Answer 1

I believe there were some changes in the Thule Mountaineer designation as the model continued to be released. The Thule Mountaineer TT or 669TT manufactured from 2005-2008 is the only version of the mountaineer to use the #TH04997. Technically this…

view full answer...

Answer 2

For your Thule Mountaineer, the correct replacement hardware is #TH04997. The distance between the mounting holes is 4 inches from bolt hole center to bolt hole center. Check out the picture I attached to see this measurement. The EasySnap hardware…

view full answer...

Answer 3

The correct replacement hinge you need is the Replacement Dual Force Strut, #TH14933, which is for the Mountaineer Cargo Box 669ES and the Frontier Cargo Box 668ES.

view full answer...

Answer 4

Yes the part #1401495200 will work on your Thule Mountaineer cargo box.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 9

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Answer 10

Hey Qhua. The Replacement Lid Lifter Hinge for Thule Force XT XL and XXL Rooftop Cargo Boxes item #TH93VA will replace both the front and rear hinge. We do not have the pn 1500054110 for the rear. What happened to your hinges?

view full answer...

Answer 11

Hey Dave. To replace the hinges that connect the lid to the base on a Thule Force XT you'll need two of the Replacement Lid Lifter Hinge for Thule Force XT XL Rooftop Cargo Boxes item #TH93VA. How did your cargo box get damaged?

view full answer...

Answer 12

Hey Howon, thanks for the information. I checked with Thule and the Replacement Lid Lifter Hinge item #TH93VA is the correct one. It is sold individually and can be used to replace either the front or rear hinge on your Thule Motion XT XXL cargo box…

view full answer...

Thule Mountaineer Lid Lifting Strut Replacement

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching